Here are Thursday morning's Cisco CCNA and CCNP practice questions!
CCNA:
A frame enters a switch port. The destination MAC address is known. Which of the following terms best describes how the frame will be transmitted?
A. unicast
B. multicast
C. broadcast
D. flooded
E. filtered
CCNP / BSCI:
Which of the following values does not have to be agreed upon between potential OSPF neighbors in order for an adjacency to be created?
A. area number
B. stub flag
C. process number
D. hello timer
E. dead timer
CCNP / BCMSN:
You want to apply port security to a switch port. No other configuration has been added. The switch is a 2950. What do you first have to do?
A. Nothing.
B. Make the port an access port.
C. Make the port a trunking port.
D. Place the port in dynamic desirable mode.
E. Place the port in dynamic auto or trunking mode.
CCNP / BCRAN:
Which of the following describes an S/T point?
A. It's a 4-wire circuit.
B. It's a 2-wire circuit.
C. It's found between a TE1 and NT1.
D. It's found between an NT1 and NT2.
CCNP / CIT:
Which TAC priority level is described by the following?
The network is badly degraded, business processes are impacted, and no workaround is possible.
A. Priority 0
B. Priority 1
C. Priority 2
D. Priority 3
E. Priority 4
F. Priority 5
See you later today with more Cisco certification exam practice questions and answers!
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
A frame enters a switch port. The destination MAC address is known. Which of the following terms best describes how the frame will be transmitted?
A. unicast
B. multicast
C. broadcast
D. flooded
E. filtered
CCNP / BSCI:
Which of the following values does not have to be agreed upon between potential OSPF neighbors in order for an adjacency to be created?
A. area number
B. stub flag
C. process number
D. hello timer
E. dead timer
CCNP / BCMSN:
You want to apply port security to a switch port. No other configuration has been added. The switch is a 2950. What do you first have to do?
A. Nothing.
B. Make the port an access port.
C. Make the port a trunking port.
D. Place the port in dynamic desirable mode.
E. Place the port in dynamic auto or trunking mode.
CCNP / BCRAN:
Which of the following describes an S/T point?
A. It's a 4-wire circuit.
B. It's a 2-wire circuit.
C. It's found between a TE1 and NT1.
D. It's found between an NT1 and NT2.
CCNP / CIT:
Which TAC priority level is described by the following?
The network is badly degraded, business processes are impacted, and no workaround is possible.
A. Priority 0
B. Priority 1
C. Priority 2
D. Priority 3
E. Priority 4
F. Priority 5
See you later today with more Cisco certification exam practice questions and answers!
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments
1. Since the switch knows the destination MAC address and that address is in the "bridging table/CAM table" the frame will be unicast to that destination MAC address only.