Hello again! Here's the first set of Cisco CCNA and CCNP exam practice questions for Monday!

CCNA:

Identify the three Layer 2 encapsulation options.

A. HDLC

B. Frame Relay

C. Ethernet

D. Token Ring

E. PPP


CCNP / BSCI:

R1 is redistributing RIP routes into the OSPF domain. R1 is in Area 0. You want to advertise one summary route into OSPF to represent these routes instead of the individual routes. Which command is appropriate for this purpose?

A. area range

B. area 0 stub

C. area 0 nssa

D. area 0 stub no-summary

E. summary-address


CCNP / BCMSN:

IEEE 802.1x must be enabled on a switch globally in order to use dot1x port-based authentication. What command enables dot1x globally on a switch?

A. ieee dot1x enable

B. enable ieee

C. dot1x system-auth-control

D. aaa authentication dot1x


CCNP / BCRAN:

Identify the true statement.

A. RADIUS supports ARAP, TACACS+ does not.

B. TACACS+ supports ARAP, RADIUS does not.

C. Neither TACACS+ nor RADIUS supports ARAP.

D. Both TACACS+ and RADIUS support ARAP.


CCNP / CIT:

Short answer: The ping command tests which levels of the OSI model?

See you later today with the answers to yesterday's questions, and more free CCNA and CCNP exam practice questions - only from The Bryant Advantage!

To your Cisco certification success,

Chris Bryant
CCIE #12933
www.thebryantadvantage.com