Here are the answers to Wednesday night's CCNA and CCNP practice questions!
CCNA:
At what point in a WAN is CIDR performed?
A. By the frame provider.
B. By the ISP.
C. By the network admin, at L3 of the OSI model.
D. By the network admin, at L2 of the OSI model.
Answer: CIDR is performed by the ISP.
CCNP / BSCI:
What is RIP's default behavior regarding what update versions to send and receive?
A. Send V1, Receive V1
B. Send V1 and V2, Receive V1
C. Send V2, Receive V1 and V2
D. Send V2, Receive V2
E. Send V1, Receive V2
F. None of the above.
Answer: F. RIP sends V1 updates by default, and accepts V1 and V2.
CCNP / BCMSN:
BPDUs are what type of network traffic?
A. unicast
B. broadcast
C. multicast
D. flooded
E. filtered
Answer: B. BPDUs are multicasts.
CCNP / BCRAN:
What of the following is the term used to describe the bandwidth available to a frame customer that is above and beyond the guaranteed rate?
A. CIR
B. Peak
C. EIR
D. DE
E. Bc
F. Be
Answer: C. That's the Extended Information Rate - EIR.
CCNP / CIT:
What command shows EIGRP hellos being sent and received, as shown below? Short answer.
3w2d: EIGRP: Sending HELLO on Ethernet0
3w2d: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
3w2d: EIGRP: Received HELLO on Ethernet0 nbr 172.12.23.2
3w2d: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0 peerQ un/rely 0/0
3w2d: EIGRP: Received HELLO on Ethernet0 nbr 172.12.23.3
3w2d: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0 peerQ un/rely 0/0
Answer: That's part of the output of show eigrp packets.
See you later tonight with more Cisco CCNA and CCNP practice questions !
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
At what point in a WAN is CIDR performed?
A. By the frame provider.
B. By the ISP.
C. By the network admin, at L3 of the OSI model.
D. By the network admin, at L2 of the OSI model.
Answer: CIDR is performed by the ISP.
CCNP / BSCI:
What is RIP's default behavior regarding what update versions to send and receive?
A. Send V1, Receive V1
B. Send V1 and V2, Receive V1
C. Send V2, Receive V1 and V2
D. Send V2, Receive V2
E. Send V1, Receive V2
F. None of the above.
Answer: F. RIP sends V1 updates by default, and accepts V1 and V2.
CCNP / BCMSN:
BPDUs are what type of network traffic?
A. unicast
B. broadcast
C. multicast
D. flooded
E. filtered
Answer: B. BPDUs are multicasts.
CCNP / BCRAN:
What of the following is the term used to describe the bandwidth available to a frame customer that is above and beyond the guaranteed rate?
A. CIR
B. Peak
C. EIR
D. DE
E. Bc
F. Be
Answer: C. That's the Extended Information Rate - EIR.
CCNP / CIT:
What command shows EIGRP hellos being sent and received, as shown below? Short answer.
3w2d: EIGRP: Sending HELLO on Ethernet0
3w2d: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0
3w2d: EIGRP: Received HELLO on Ethernet0 nbr 172.12.23.2
3w2d: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0 peerQ un/rely 0/0
3w2d: EIGRP: Received HELLO on Ethernet0 nbr 172.12.23.3
3w2d: AS 100, Flags 0x0, Seq 0/0 idbQ 0/0 iidbQ un/rely 0/0 peerQ un/rely 0/0
Answer: That's part of the output of show eigrp packets.
See you later tonight with more Cisco CCNA and CCNP practice questions !
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments