Here are the answers to the first set of Cisco CCNA and CCNP exam practice questions for Monday!
CCNA:
Identify the three Layer 2 encapsulation options.
A. HDLC
B. Frame Relay
C. Ethernet
D. Token Ring
E. PPP
Answer: A, B, E. Ethernet and Token Ring are Physical layer technologies.
CCNP / BSCI:
R1 is redistributing RIP routes into the OSPF domain. R1 is in Area 0. You want to advertise one summary route into OSPF to represent these routes instead of the individual routes. Which command is appropriate for this purpose?
A. area range
B. area 0 stub
C. area 0 nssa
D. area 0 stub no-summary
E. summary-address
Answer: To perform route summarization on the ASBR, use the summary-address command.
CCNP / BCMSN:
IEEE 802.1x must be enabled on a switch globally in order to use dot1x port-based authentication. What command enables dot1x globally on a switch?
A. ieee dot1x enable
B. enable ieee
C. dot1x system-auth-control
D. aaa authentication dot1x
Answer: C. Long command, and that's what it does!
CCNP / BCRAN:
Identify the true statement.
A. RADIUS supports ARAP, TACACS+ does not.
B. TACACS+ supports ARAP, RADIUS does not.
C. Neither TACACS+ nor RADIUS supports ARAP.
D. Both TACACS+ and RADIUS support ARAP.
Answer: B. RADIUS does not support Appletalk Remote Access Protocol (ARAP). RADIUS also does not support NASI, NetBIOS Frame Protocol Control, or X.25 PAD. TACACS+ supports all of these.
CCNP / CIT:
Short answer: The ping command tests which levels of the OSI model?
Answer: The ping command tests layers 1 - 3 of the OSI model.
See you later tonight with the answers to Monday night's questions, another set of CCNA and CCNP practice questions, and more - only from The Bryant Advantage!
To your Cisco certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
Identify the three Layer 2 encapsulation options.
A. HDLC
B. Frame Relay
C. Ethernet
D. Token Ring
E. PPP
Answer: A, B, E. Ethernet and Token Ring are Physical layer technologies.
CCNP / BSCI:
R1 is redistributing RIP routes into the OSPF domain. R1 is in Area 0. You want to advertise one summary route into OSPF to represent these routes instead of the individual routes. Which command is appropriate for this purpose?
A. area range
B. area 0 stub
C. area 0 nssa
D. area 0 stub no-summary
E. summary-address
Answer: To perform route summarization on the ASBR, use the summary-address command.
CCNP / BCMSN:
IEEE 802.1x must be enabled on a switch globally in order to use dot1x port-based authentication. What command enables dot1x globally on a switch?
A. ieee dot1x enable
B. enable ieee
C. dot1x system-auth-control
D. aaa authentication dot1x
Answer: C. Long command, and that's what it does!
CCNP / BCRAN:
Identify the true statement.
A. RADIUS supports ARAP, TACACS+ does not.
B. TACACS+ supports ARAP, RADIUS does not.
C. Neither TACACS+ nor RADIUS supports ARAP.
D. Both TACACS+ and RADIUS support ARAP.
Answer: B. RADIUS does not support Appletalk Remote Access Protocol (ARAP). RADIUS also does not support NASI, NetBIOS Frame Protocol Control, or X.25 PAD. TACACS+ supports all of these.
CCNP / CIT:
Short answer: The ping command tests which levels of the OSI model?
Answer: The ping command tests layers 1 - 3 of the OSI model.
See you later tonight with the answers to Monday night's questions, another set of CCNA and CCNP practice questions, and more - only from The Bryant Advantage!
To your Cisco certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments