Welcome back! Here are the answers to yesterday's CCNA and CCNP certification exam practice questions!

CCNA:

Short answer: What's the full command to set a router's OSPF Router ID to 10.10.10.10 ?

Answer: Under the OSPF routing process, run router-id 10.10.10.10.


CCNP / BSCI:

What LSA type is generated by an ABR and describes inter-area links?

A. Type 1

B. Type 2

C. Type 3

D. Type 4

E. Type 5

F. Type 6

Answer: C. Type 3 LSAs are generated by ABRs and describe inter-area links.


CCNP / BCMSN:

Which of the following is defined by IEEE 802.3ad?

A. Portfast

B. LACP

C. PAgP

D. Backbonefast

Answer: B.



CCNP / BCRAN:

Short answer: Name the PRI linecode types.

Answer: The PRI linecode types are Alternate Mark Inversion (AMI), Binary 8-Zero Substitution (b8zs), and High Density Bipolar 3 (hdb3). AMI is the default.



CCNP / CIT:

If you cannot ping a router by its hostname from the local router, where should you check first?

A. The local DNS server.

B. The local IP Host table.

C. The remote DNS server.

D. The remote IP Host table.

Answer: B. The local IP Host table is the first place checked by the name resolution process, so check there first!


See you later today with another set of Cisco certification questions, and three new tutorials as well!

To your CCNA and CCNP success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com