Welcome back! Here are the answers to Tuesday's Cisco CCNA and CCNP certification exam training questions!
CCNA:
By default, what traffic resets the dialer idle-timeout value?
A. All traffic.
B. No traffic.
C. All interesting traffic.
D. Any IP-based traffic.
E. Any ICMP-based traffic.
Answer: B. By default, there is no interesting traffic. After all, we don't want the ISDN link coming up for just any traffic!
CCNP / BSCI:
What command will show whether a router's neighbors are or are not an ABR or ASBR?
A. show ip ospf database
B. show ip ospf border-routers
C. show ip ospf neighbors
D. show ip route ospf
Answer: B.
CCNP / BCMSN: What's the default behavior for Voice VLANs regarding Portfast?
A. A port configured with a Voice VLAN cannot run Portfast.
B. A port configured with a Voice VLAN will have Portfast running by default.
C. Removing a Voice VLAN from a port does not disable Portfast.
D. A port configured with a Voice VLAN can run Portfast only in aggressive mode.
Answer: B. Portfast comes up in the strangest places, doesn't it? Here, Portfast is enabled by default when a Voice VLAN is configured on a switch port.
CCNP / BCRAN: Identify the true statements regarding Frame Relay.
A. It's cheaper than leased lines.
B. It's more expensive than leased lines.
C. Data may not take the same path from one endpoint to another.
D. Data will always take the same path from one endpoint to another.
Answer: A, C. Frame Relay is a lot cheaper than leased lines, and data can take different paths through the Frame Relay cloud to get to the destination.
CCNP / CIT: What command resulted in the following output?
**** No Global ISDN Switchtype currently defined ****
A. show dialer
B. show isdn status
C. show switchtype
D. debug isdn status
E. debug isdn q921
F. debug isdn q931
Answer: B. The first ISDN command to run when troubleshooting is show isdn status.
I'll see you later today with another batch of fresh-baked Cisco CCNA and CCNP certification exam training questions!
To your Cisco certification success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA:
By default, what traffic resets the dialer idle-timeout value?
A. All traffic.
B. No traffic.
C. All interesting traffic.
D. Any IP-based traffic.
E. Any ICMP-based traffic.
Answer: B. By default, there is no interesting traffic. After all, we don't want the ISDN link coming up for just any traffic!
CCNP / BSCI:
What command will show whether a router's neighbors are or are not an ABR or ASBR?
A. show ip ospf database
B. show ip ospf border-routers
C. show ip ospf neighbors
D. show ip route ospf
Answer: B.
CCNP / BCMSN: What's the default behavior for Voice VLANs regarding Portfast?
A. A port configured with a Voice VLAN cannot run Portfast.
B. A port configured with a Voice VLAN will have Portfast running by default.
C. Removing a Voice VLAN from a port does not disable Portfast.
D. A port configured with a Voice VLAN can run Portfast only in aggressive mode.
Answer: B. Portfast comes up in the strangest places, doesn't it? Here, Portfast is enabled by default when a Voice VLAN is configured on a switch port.
CCNP / BCRAN: Identify the true statements regarding Frame Relay.
A. It's cheaper than leased lines.
B. It's more expensive than leased lines.
C. Data may not take the same path from one endpoint to another.
D. Data will always take the same path from one endpoint to another.
Answer: A, C. Frame Relay is a lot cheaper than leased lines, and data can take different paths through the Frame Relay cloud to get to the destination.
CCNP / CIT: What command resulted in the following output?
**** No Global ISDN Switchtype currently defined ****
A. show dialer
B. show isdn status
C. show switchtype
D. debug isdn status
E. debug isdn q921
F. debug isdn q931
Answer: B. The first ISDN command to run when troubleshooting is show isdn status.
I'll see you later today with another batch of fresh-baked Cisco CCNA and CCNP certification exam training questions!
To your Cisco certification success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments