Here are Friday's Cisco CCNA and CCNP training questions!

CCNA:

You want to configure unequal-cost load-sharing on your EIGRP router. How can you find the metric for the path you want to include in the routing table that is not currently there?

A. show ip eigrp neighbor

B. show ip eigrp topology

C. show ip route eigrp

D. debug ip eigrp transactions


CCNP / BSCI:

An ISIS L1 router can form an adjacency with what other router types?

A. An L1 in another area.

B. An L1 in the same area.

C. An L1/L2 in the same area.

D. An L1/L2 in another area.

E. An L2 in the same area.

F. An L2 in another area.


CCNP / BCMSN:

When dynamic VLANs are in use, what value decides a switch port's VLAN membership?'

A. The VLAN configured on the port.

B. The host's IP address.

C. The host's MAC address.

D. The IP subnet the host can be found on.


CCNP / BCRAN:

The cable modem has acquired an RF. What will the CMTS now do?

A. Send a DHCP request

B. Send a DHCP reply

C. Send maintenance messages

D. Send a TFTP reply

E. Send a TFTP request


CCNP / CIT:

According to the following command, what protocol is being configured for redistribution for routes from a RIP domain?

R3(config-router)#redistribute rip metric 1544 10 255 1 1500

A. OSPF

B. BGP

C. EIGRP

D. RIP version 2

E. RIP version 1


Answers will be posted on Saturday, along with another set of Cisco CCNA and CCNP certification exam practice questions!

To your Cisco certification success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com