Welcome back! Here are the answers to Wednesday's Cisco CCNA and CCNP certification exam practice questions!
CCNA:
What command enables equal-cost load-sharing in RIP?
A. maximum-paths
B. variance
C. rip load-share
D. No command is needed - it's on by default.
Answer: D. You can change the values for equal-cost load-sharing with the maximum-paths command, but it's enabled by default.
CCNP / BSCI:
By default, iBGP routers cannot propagate routes to iBGP neighbors that were originally learned from another iBGP router. Which of the following describe methods of circumventing this rule?
A. turning synchronization off
B. turning synchronization on
C. turning split horizon on
D. turning split horizon off
E. configuring route reflectors
F. changing route weights
G. configuring confederations
H. changing route LOCAL_PREF attributes
Answers: E, G. Route reflectors and confederations allow us to get around the iBGP full mesh rule.
CCNP / BCMSN:
New Cisco switches assign a 10,000 MBPS port a speed of ____________.
A. 1
B. 2
C. 10
D. 19
E. 255
Answer: B. Originally assigned a cost of 1, ports running at 10,000 MBPS - also expressed as 10 GBPS - are assigned a port cost of 2.
CCNP / BCRAN:
What term applies to dictating what users can do once they're in the network?
A. accounting
B. authentication
C. authorization
Answer: C. Authentication lets the user into the network; authorization dictates what the user can do once they're in; accounting tracks what network or department resources are used.
CCNP / CIT:
Which of the following statements is true regarding CHAP?
A. PPP is required.
B. HDLC is required.
C. The passwords can be different at the endpoints.
D. The passwords must be the same at the endpoints.
Answers: A, D. HDLC cannot run CHAP; you need PPP for that. CHAP also requires the endpoints use the same password.
I'll see you later this morning with a new set of CCNA and CCNP practice questions!
To your Cisco certification success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
CCNA:
What command enables equal-cost load-sharing in RIP?
A. maximum-paths
B. variance
C. rip load-share
D. No command is needed - it's on by default.
Answer: D. You can change the values for equal-cost load-sharing with the maximum-paths command, but it's enabled by default.
CCNP / BSCI:
By default, iBGP routers cannot propagate routes to iBGP neighbors that were originally learned from another iBGP router. Which of the following describe methods of circumventing this rule?
A. turning synchronization off
B. turning synchronization on
C. turning split horizon on
D. turning split horizon off
E. configuring route reflectors
F. changing route weights
G. configuring confederations
H. changing route LOCAL_PREF attributes
Answers: E, G. Route reflectors and confederations allow us to get around the iBGP full mesh rule.
CCNP / BCMSN:
New Cisco switches assign a 10,000 MBPS port a speed of ____________.
A. 1
B. 2
C. 10
D. 19
E. 255
Answer: B. Originally assigned a cost of 1, ports running at 10,000 MBPS - also expressed as 10 GBPS - are assigned a port cost of 2.
CCNP / BCRAN:
What term applies to dictating what users can do once they're in the network?
A. accounting
B. authentication
C. authorization
Answer: C. Authentication lets the user into the network; authorization dictates what the user can do once they're in; accounting tracks what network or department resources are used.
CCNP / CIT:
Which of the following statements is true regarding CHAP?
A. PPP is required.
B. HDLC is required.
C. The passwords can be different at the endpoints.
D. The passwords must be the same at the endpoints.
Answers: A, D. HDLC cannot run CHAP; you need PPP for that. CHAP also requires the endpoints use the same password.
I'll see you later this morning with a new set of CCNA and CCNP practice questions!
To your Cisco certification success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
Comments