Here are the answers to yesterday's Cisco CCNA certification and CCNP certification exam training questions!
CCNA:
The hexadecimal value 1c converts to what decimal?
A. 10
B. 11
C. 12
D. 26
E. 27
F. 28
Answer: F. We've got 1 unit of 16 and "c" (12) units of 1, for a total of 28.
CCNP / BSCI:
A BGP route reflector receives a route from a nonclient peer. To whom will the RR send this route?
A. All RR clients and nonclients.
B. All RR clients.
C. All nonclients only.
D. The RR will not reflect this particular route.
Answer: B. When an RR receives routes from nonclient peers, that route is reflected to the RR's clients only.
CCNP / BCMSN: By default, in what trunking mode do ports on a 2950 run?
A. dynamic auto
B. on
C. dynamic desirable
D. off
E. dynamic unconditional
Answer: C. By default, a Cisco 2950 switch has all its ports in dynamic desirable mode, which means the ports are actively attempting to trunk.
CCNP / BCRAN: Which of the following commands enables AAA?
A. It's enabled by default.
B. aaa domain-server
C. aaa new-model
D. aaa enable
Answer: C. The aaa new-model command enables AAA.
CCNP / CIT: What Microsoft command shows you the NIC type and MAC address, active network destinations, network masks, gateways, interface IP addresses, and path metrics?
A. arp -a
B. tracert
C. show ip route
D. show config
E. route print
F. ipconfig /all
Answer: E. That's the route print command. ipconfig /all gives you some of that information, but nothing about routes.
See you later today with a new set of Cisco CCNA certification training questions - and CCNP certification questions as well!
To your Cisco certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
CCNA:
The hexadecimal value 1c converts to what decimal?
A. 10
B. 11
C. 12
D. 26
E. 27
F. 28
Answer: F. We've got 1 unit of 16 and "c" (12) units of 1, for a total of 28.
CCNP / BSCI:
A BGP route reflector receives a route from a nonclient peer. To whom will the RR send this route?
A. All RR clients and nonclients.
B. All RR clients.
C. All nonclients only.
D. The RR will not reflect this particular route.
Answer: B. When an RR receives routes from nonclient peers, that route is reflected to the RR's clients only.
CCNP / BCMSN: By default, in what trunking mode do ports on a 2950 run?
A. dynamic auto
B. on
C. dynamic desirable
D. off
E. dynamic unconditional
Answer: C. By default, a Cisco 2950 switch has all its ports in dynamic desirable mode, which means the ports are actively attempting to trunk.
CCNP / BCRAN: Which of the following commands enables AAA?
A. It's enabled by default.
B. aaa domain-server
C. aaa new-model
D. aaa enable
Answer: C. The aaa new-model command enables AAA.
CCNP / CIT: What Microsoft command shows you the NIC type and MAC address, active network destinations, network masks, gateways, interface IP addresses, and path metrics?
A. arp -a
B. tracert
C. show ip route
D. show config
E. route print
F. ipconfig /all
Answer: E. That's the route print command. ipconfig /all gives you some of that information, but nothing about routes.
See you later today with a new set of Cisco CCNA certification training questions - and CCNP certification questions as well!
To your Cisco certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
Comments