Here's Tuesday's first set of CCNA, CCNP, Network+, and Security+ questions! That's right, to celebrate my new Network+ Study Package, there will be two sets of practice questions today!

CCNA:

A frame enters a switchport. The destination MAC address is known. Which of the following terms best describes how the frame will be transmitted?

A. filtered

B. forwarded

C. flooded

D. dropped


Network+ :

Identify the fiber-optic cables.

A. 1000Base-CX

B. 100Base-FX

C. 100Base-TX

D. 10GBase-SR


Security+ :

Briefly describe the term dictionary attack.


CCNP / BSCI:

You would like your users found off the ethernet0 interface on your router to have their NTP (port 123) broadcasts translated to unicasts to be sent to 172.1.1.1. You have already configured "ip helper-address 172.1.1.1" on e0. Do you have to do anything else?

A. No, that command takes care of it.

B. Yes, you need to add the ip helper-protocol 123 command.

C. Yes, you need to add the ip forward-protocol 123 command.

D. Yes, you need to disable DNS lookups with no ip domain-lookup.


CCNP / BCMSN:

You want to connect a router's AUI port to a switch port. What kind of cable will you need?

A. straight-through

B. crossover

C. DTE/DCE

D. rollover

Extra credit: What else will you need?


CCNP / BCRAN:

Identify the main stages of SVC construction.

A. call setup

B. data transfer

C. idle

D. call termination

E. three-way handshake

F. DLCI discovery

G. LMI leasing


CCNP / CIT:

A TA is required when using an NT2. What reference point is found between the two?

A. R

B. S

C. T

D. S/T

E. U


See you tomorrow with the answers to these questions, and later this afternoon with another set of Cisco and CompTIA exam practice questions!

To your success,

Chris Bryant
CCIE #12933
www.thebryantadvantage.com