Here are Wednesday's CCNA, CCNP, and Network+ exam questions!

CCNA:

The full command to configure OSPF Area 23 as a total stub area is ____________ .
The command would go on the blank line at the bottom of this config:

R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#router ospf 1
R3(config-router)#


Network+ :

The IEEE 802.3u standard defines which of the following?

A. Ethernet

B. Fast Ethernet

C. Really Fast Ethernet

D. Gigabit Ethernet

E. 10 Gigabit Ethernet


CCNP / BSCI:

You've put multihoming into effect in your BGP AS. The router that is communicating with your ISPs is low on memory and CPU. What type of routes would it benefit your router to receive from the ISP?

A. default routes

B. default routes and some more-specific routes as needed

C. all of the more-specific routes

D. BGP routes only


CCNP / BCMSN:

A VTP switch has a revision number of 5. This switch receives a VTP advertisement with a revision number of 6. What action(s) will this switch take?

A. The switch will reject the advertisement.

B. The switch will accept the advertisement.

C. The switch will increment its revision number.

D. The switch will decrement its revision number.

E. The switch will take no action regarding its own revision number.


CCNP / BCRAN:

How many classes can be defined for Custom Queueing?

A. 12

B. 64

C. 128

D. Any number, but it must be a power of two.


CCNP / CIT:

Short answer: The ping command tests which levels of the OSI model?


See you Tuesday with the answers to these questions, and another set of Cisco and CompTIA certification exam questions!

To your certification exam success,

Chris Bryant
CCIE #12933
www.thebryantadvantage.com