Here are the answers to Wednesday's CCNA, CCNP, and Network+ exam questions!
CCNA:
The full command to configure OSPF Area 23 as a total stub area is ____________ .
The command would go on the blank line at the bottom of this config:
R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#router ospf 1
R3(config-router)#
Answer: area 23 stub no-summary if R3 is the ABR; if not, the command area 23 stub will do the job.
Network+ :
The IEEE 802.3u standard defines which of the following?
A. Ethernet
B. Fast Ethernet
C. Really Fast Ethernet
D. Gigabit Ethernet
E. 10 Gigabit Ethernet
Answer: B.
CCNP / BSCI:
You've put multihoming into effect in your BGP AS. The router that is communicating with your ISPs is low on memory and CPU. What type of routes would it benefit your router to receive from the ISP?
A. default routes
B. default routes and some more-specific routes as needed
C. all of the more-specific routes
D. BGP routes only
Answer: A. When your AS is multihoming, the router that is communicating with your ISP should have as much memory and CPU as possible. If that router happens to be low on these resources, the ISP should send this router default routes, which have the lowest impact on CPU and memory. If CPU and memory are not really a concern, your router should be getting the more-specific routes. There is a middle ground where your ISP could send a default route and some more-specific routes as well.
CCNP / BCMSN:
A VTP switch has a revision number of 5. This switch receives a VTP advertisement with a revision number of 6. What action(s) will this switch take?
A. The switch will reject the advertisement.
B. The switch will accept the advertisement.
C. The switch will increment its revision number.
D. The switch will decrement its revision number.
E. The switch will take no action regarding its own revision number.
Answer: B, C. The switch accepts the ad and increments its own revision number.
CCNP / BCRAN:
How many classes can be defined for Custom Queueing?
A. 12
B. 64
C. 128
D. Any number, but it must be a power of two.
Answer: B.
CCNP / CIT:
Short answer: The ping command tests which levels of the OSI model?
Answer: Levels 1 - 3.
See you later today with the answers to Thursday's questions and a new set of questions. And don't forget - my exclusive Network+ Study Package comes out on Monday, and you save $20 by purchasing it in the first 77 hours!
To your certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
The full command to configure OSPF Area 23 as a total stub area is ____________ .
The command would go on the blank line at the bottom of this config:
R3#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R3(config)#router ospf 1
R3(config-router)#
Answer: area 23 stub no-summary if R3 is the ABR; if not, the command area 23 stub will do the job.
Network+ :
The IEEE 802.3u standard defines which of the following?
A. Ethernet
B. Fast Ethernet
C. Really Fast Ethernet
D. Gigabit Ethernet
E. 10 Gigabit Ethernet
Answer: B.
CCNP / BSCI:
You've put multihoming into effect in your BGP AS. The router that is communicating with your ISPs is low on memory and CPU. What type of routes would it benefit your router to receive from the ISP?
A. default routes
B. default routes and some more-specific routes as needed
C. all of the more-specific routes
D. BGP routes only
Answer: A. When your AS is multihoming, the router that is communicating with your ISP should have as much memory and CPU as possible. If that router happens to be low on these resources, the ISP should send this router default routes, which have the lowest impact on CPU and memory. If CPU and memory are not really a concern, your router should be getting the more-specific routes. There is a middle ground where your ISP could send a default route and some more-specific routes as well.
CCNP / BCMSN:
A VTP switch has a revision number of 5. This switch receives a VTP advertisement with a revision number of 6. What action(s) will this switch take?
A. The switch will reject the advertisement.
B. The switch will accept the advertisement.
C. The switch will increment its revision number.
D. The switch will decrement its revision number.
E. The switch will take no action regarding its own revision number.
Answer: B, C. The switch accepts the ad and increments its own revision number.
CCNP / BCRAN:
How many classes can be defined for Custom Queueing?
A. 12
B. 64
C. 128
D. Any number, but it must be a power of two.
Answer: B.
CCNP / CIT:
Short answer: The ping command tests which levels of the OSI model?
Answer: Levels 1 - 3.
See you later today with the answers to Thursday's questions and a new set of questions. And don't forget - my exclusive Network+ Study Package comes out on Monday, and you save $20 by purchasing it in the first 77 hours!
To your certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments