Hello again! Here are Wednesday's Cisco and CompTIA certification exam practice questions!
CCNA:
Short answer: Convert the following binary string to a hexadecimal value.
11100110
Network+ :
Which of the following RAID levels requires the least number of hard drives?
Short answer: Convert the following binary string to a hexadecimal value.
11100110
Network+ :
Which of the following RAID levels requires the least number of hard drives?
A. RAID 0
B. RAID 1
C. RAID 3
D. RAID 5
E. RAID 6
F. RAID 10
CCNP / BSCI:
A route redistributed into ISIS is assigned what metric by default?
A. 0
B. 10
C. 64
D. 254
E. There is no default ISIS seed metric - one must be assigned or redistribution will fail.
CCNP / BCRAN:
Which of the following commands will clear dynamically created NAT mappings?
A. clear ip nat map *
B. clear ip nat trans *
C. clear ip nat dynamic all
D. clear ip nat all
CCNP / BCMSN:
Short answer: A switch's priority is at the default setting, and it has a MAC address of aa-aa-aa-aa-aa-aa. What is this switch's BID in the root bridge election?
CCNP / CIT:
You've just configured SPIDs on a BRI interface. You know they are correct, but show isdn status tells you they're not valid. What should you do?
A. Run debug isdn q921.
B. Run debug isdn q931.
C. Close the interface and reopen it.
D. Configure the ISDN switchtype.
A. clear ip nat map *
B. clear ip nat trans *
C. clear ip nat dynamic all
D. clear ip nat all
CCNP / BCMSN:
Short answer: A switch's priority is at the default setting, and it has a MAC address of aa-aa-aa-aa-aa-aa. What is this switch's BID in the root bridge election?
CCNP / CIT:
You've just configured SPIDs on a BRI interface. You know they are correct, but show isdn status tells you they're not valid. What should you do?
A. Run debug isdn q921.
B. Run debug isdn q931.
C. Close the interface and reopen it.
D. Configure the ISDN switchtype.
I'll see you later today with the answers to yesterday's Cisco and CompTIA exam questions!
To your certification exam success,
Chris Bryant
CCIE #12933
Comments