Here are Friday's CCNA, CCNP, Network+, and Security+ exam questions! All Friday questions are short answer.
CCNA:
Name three major differences between RIPv1 and RIPv2.
Network+:
Host A wants the MAC address of Host B. There's a network connectivity device between them. Briefly describe how each of the following devices would affect ARP: bridge, switch, hub, repeater, router.
Security+:
Briefly describe PGP and its main use.
CCNP / BSCI:
Regarding policy routing, what happens to packets that have an implicit deny applied?
CCNP / BCMSN:
On which port types can a voice VLAN not be configured?
CCNP / BCRAN:
Name the two modes in which IKE Phase I can be run.
CCNP / CIT:
You run "show span" on a 2950 switch. You'll see information about what protocol or service?
See you later today with the answers to this past week's questions!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
CCNA:
Name three major differences between RIPv1 and RIPv2.
Network+:
Host A wants the MAC address of Host B. There's a network connectivity device between them. Briefly describe how each of the following devices would affect ARP: bridge, switch, hub, repeater, router.
Security+:
Briefly describe PGP and its main use.
CCNP / BSCI:
Regarding policy routing, what happens to packets that have an implicit deny applied?
CCNP / BCMSN:
On which port types can a voice VLAN not be configured?
CCNP / BCRAN:
Name the two modes in which IKE Phase I can be run.
CCNP / CIT:
You run "show span" on a 2950 switch. You'll see information about what protocol or service?
See you later today with the answers to this past week's questions!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
Comments