Here's Saturday's first batch of CCNA, CCNP, and Network+ exam questions! (Blogger lost a few of my posts, so if you're seeing this for the first time on Sunday, that's why! :) )

CCNA:

What devices typically make up a Frame Relay cloud?

A. frame relay switches (DTEs)

B. frame relay switches (DCEs)

C. frame relay routers (DCEs)

D. frame relay routers (DTEs)


Network+ :

Which of the following topologies is most likely to utilize CSMA/CD ?

A. ring

B. bus

C. star

D. full mesh



CCNP / BSCI:

Four routers are competing to be the OSPF DR on an Ethernet segment. The highest IP address on each router is listed. Which of the following routers will win?


A. R1, loopback0, 100.1.1.1

B. R2, loopback0, 200.2.2.2

C. R3, ethernet0, 210.1.1.1

D. R4, ethernet1, 210.1.1.2

E. Not enough information is given to answer the question.


CCNP / BCMSN:

A switch has two paths to the root bridge. One is direct, the other goes through another switch. You want to lessen the delay that will occur if the current root port goes down. What Cisco feature can help?

A. portfast

B. uplinkfast

C. backbonefast

D. BPDU skewing


CCNP / BCRAN:

Which of the following bits is always set on traffic that is sent after the CIR is reached?

A. BECN

B. FECN

C. DE

D. BE


CCNP / CIT:

"show interface serial1" tells you that the interface is down, as is the line protocol. What's the most likely issue?

A. There's a loose cable.

B. There's a keepalive or clockrate issue.

C. The interface is administratively shut down.

D. The routing protocol on the interface is misconfigured.


I'll see you later this morning with more CCNA, CCNP, and Network+ practice questions, Blogger willing! ;)

To your certification exam success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com