Welcome! Here are the answers to yesterday's CCNA and CCNP certification exam practice questions:
CCNA:
Fill in the blanks: The full command to see all debugs running on the router is ____________ , and the full command to turn off all running debugs is ____________ .
Answer: To see all debugs, run show debug ; to turn them all off at once, run undebug all.
CCNP / BSCI:
A non-routing node on an ISIS network sends how many different ISIS hello types?
A. Zero
B. One
C. Two
D. Three
E. Four
Answer: B. This describes an ISIS End System, and End Systems send only ESH (End System Hello) packets.
CCNP / BCMSN:
What command places a user connecting to a switch via Telnet directly into privileged exec mode?
A. enable
B. login local
C. privilege level 15
D. privilege level 0
Bonus: Where should this command be configured?
Answer: C, and this command should be configured on the VTY lines.
CCNP / BCRAN:
The cable modem has received maintenance messages from the CMTS. What will happen now?
A. The cable modem sends a DHCP reply.
B. The cable modem sends a DHCP request.
C. The CMTS sends a DHCP reply.
D. The CMTS sends a DHCP request.
Answer: A. At this point, the cable modem has achieved L1 and L2 connectivity. To acquire L3 connectivity, the cable modem will now send a DHCP request.
CCNP / CIT:
What command must be used to resolve the following issue?
03:33:20: %DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 172.12.23.3 (Ethernet0) is down: K-value mismatch
A. k-value
B. value k
C. metric weights
D. ip eigrp network point-to-point
E. ip eigrp metrics
Answer: C. The k-weight mismatch can be corrected with the metric weights command.
More Cisco training questions and articles later today - see you then!
To your Cisco certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
CCNA:
Fill in the blanks: The full command to see all debugs running on the router is ____________ , and the full command to turn off all running debugs is ____________ .
Answer: To see all debugs, run show debug ; to turn them all off at once, run undebug all.
CCNP / BSCI:
A non-routing node on an ISIS network sends how many different ISIS hello types?
A. Zero
B. One
C. Two
D. Three
E. Four
Answer: B. This describes an ISIS End System, and End Systems send only ESH (End System Hello) packets.
CCNP / BCMSN:
What command places a user connecting to a switch via Telnet directly into privileged exec mode?
A. enable
B. login local
C. privilege level 15
D. privilege level 0
Bonus: Where should this command be configured?
Answer: C, and this command should be configured on the VTY lines.
CCNP / BCRAN:
The cable modem has received maintenance messages from the CMTS. What will happen now?
A. The cable modem sends a DHCP reply.
B. The cable modem sends a DHCP request.
C. The CMTS sends a DHCP reply.
D. The CMTS sends a DHCP request.
Answer: A. At this point, the cable modem has achieved L1 and L2 connectivity. To acquire L3 connectivity, the cable modem will now send a DHCP request.
CCNP / CIT:
What command must be used to resolve the following issue?
03:33:20: %DUAL-5-NBRCHANGE: IP-EIGRP 100: Neighbor 172.12.23.3 (Ethernet0) is down: K-value mismatch
A. k-value
B. value k
C. metric weights
D. ip eigrp network point-to-point
E. ip eigrp metrics
Answer: C. The k-weight mismatch can be corrected with the metric weights command.
More Cisco training questions and articles later today - see you then!
To your Cisco certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
Comments