Here are Wednesday's CCNA and CCNP practice questions!
CCNA:
On the blank console line shown below, what command can be used to prevent OSPF hellos from keeping the ISDN line up?
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#interface bri0
R2(config-if)#
CCNP / BSCI:
Which of the following protocol combinations will result in automatic route redistribution when they're configured on the same router?
A. EIGRP and IGRP using the same non-zero AS number
B. EIGRP and IGRP using different non-zero AS numbers
C. EIGRP and IGRP using AS number 0
D. EIGRP for AppleTalk, RTMP
E. EIGRP for IPX, RIP for IPX
CCNP / BCMSN:
Short answer: A Portfast-enabled port skips how many STP port states?
CCNP / BCRAN:
Identify the true statements regarding CET.
A. It's a Cisco-proprietary protocol.
B. It's an open-standard protocol.
C. It provides AH and ESP.
D. It provides some data encryption.
E. It provides no data encryption.
CCNP / CIT:
A TA is required when using an NT2. What reference point is found between the two?
A. R
B. S
C. T
D. U
Answers will be posted tomorrow!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
CCNA:
On the blank console line shown below, what command can be used to prevent OSPF hellos from keeping the ISDN line up?
R2#conf t
Enter configuration commands, one per line. End with CNTL/Z.
R2(config)#interface bri0
R2(config-if)#
CCNP / BSCI:
Which of the following protocol combinations will result in automatic route redistribution when they're configured on the same router?
A. EIGRP and IGRP using the same non-zero AS number
B. EIGRP and IGRP using different non-zero AS numbers
C. EIGRP and IGRP using AS number 0
D. EIGRP for AppleTalk, RTMP
E. EIGRP for IPX, RIP for IPX
CCNP / BCMSN:
Short answer: A Portfast-enabled port skips how many STP port states?
CCNP / BCRAN:
Identify the true statements regarding CET.
A. It's a Cisco-proprietary protocol.
B. It's an open-standard protocol.
C. It provides AH and ESP.
D. It provides some data encryption.
E. It provides no data encryption.
CCNP / CIT:
A TA is required when using an NT2. What reference point is found between the two?
A. R
B. S
C. T
D. U
Answers will be posted tomorrow!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com
Comments