Here are Saturday night's Cisco CCNA and CCNP certification exam practice questions!
CCNA:
What of the following describes the amount of bandwidth guaranteed to the customer by the frame provider?
A. BC
B. BE
C. DC
D. Peak
E. CIR
F. EIR
CCNP / BSCI:
Traffic destined for 110.1.1.1 would use what local interface to exit the router? Assume a default static route has been created that uses Serial2 as its exit interface.
O 110.1.1.0/24 [110/20] via ethernet0
R 110.1.1.0/24 [120/4] via serial0
O 110.1.1.0/24 [110/10] via serial1
CCNP / BCMSN:
Short answer: What interface-level command allows a port to trust an incoming CoS value?
CCNP / BCRAN:
What interface type(s) require the use of the frame-relay interface-dlci command?
A. Any kind of subinterface.
B. Any interface or subinterface that uses Inverse ARP.
C. Any interface or subinterface that does not use Inverse ARP.
D. A point-to-point subinterface only.
E. A multipoint subinterface only.
CCNP / CIT:
Browse the following switch output and identify the true statements.
switch (enable) xxxxxx xxxxxxx
Destination : Port 6/1
Admin Source : Port 6/2
Oper Source : Port 6/2
Direction : transmit/receive
Incoming Packets: disabled
Learning : enabled
Multicast : enabled
Filter : - Status : active
Total local span sessions: 1
A. The command represented by x is show span.
B. The command represented by x is show spanning-tree.
C. The command represented by x is show monitor session.
D. The switch is most likely a Catalyst 5000.
E. The switch is most likely a Catalyst 2950.
See you tomorrow with the answers and more Cisco certification practice questions on Sunday!
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
What of the following describes the amount of bandwidth guaranteed to the customer by the frame provider?
A. BC
B. BE
C. DC
D. Peak
E. CIR
F. EIR
CCNP / BSCI:
Traffic destined for 110.1.1.1 would use what local interface to exit the router? Assume a default static route has been created that uses Serial2 as its exit interface.
O 110.1.1.0/24 [110/20] via ethernet0
R 110.1.1.0/24 [120/4] via serial0
O 110.1.1.0/24 [110/10] via serial1
CCNP / BCMSN:
Short answer: What interface-level command allows a port to trust an incoming CoS value?
CCNP / BCRAN:
What interface type(s) require the use of the frame-relay interface-dlci command?
A. Any kind of subinterface.
B. Any interface or subinterface that uses Inverse ARP.
C. Any interface or subinterface that does not use Inverse ARP.
D. A point-to-point subinterface only.
E. A multipoint subinterface only.
CCNP / CIT:
Browse the following switch output and identify the true statements.
switch (enable) xxxxxx xxxxxxx
Destination : Port 6/1
Admin Source : Port 6/2
Oper Source : Port 6/2
Direction : transmit/receive
Incoming Packets: disabled
Learning : enabled
Multicast : enabled
Filter : - Status : active
Total local span sessions: 1
A. The command represented by x is show span.
B. The command represented by x is show spanning-tree.
C. The command represented by x is show monitor session.
D. The switch is most likely a Catalyst 5000.
E. The switch is most likely a Catalyst 2950.
See you tomorrow with the answers and more Cisco certification practice questions on Sunday!
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments