Here are the answers to Sunday's Cisco CCNA and CCNP practice questions!
CCNA:
You have no IP connectivity to a downstream router. What tool will allow you to determine which downstream router has a problem?
A. ping
B. traceroute
C. find
D. extended ping
Answer: B. ping shows you that you've got a problem; traceroute helps you determine which downstream router is causing the problem.
CCNP / BSCI:
What does the "IA" mean in the following route table ?
R1#show ip route ospf
2.0.0.0/32 is subnetted, 1 subnets
O IA 2.2.2.2 [110/65] via 172.12.123.2, 00:00:00, Serial0
A. The network is in the same area as R1.
B. The network is in another area.
C. The network was learned via route redistribution from RIP.
D. The network was learned via route redistribution from EIGRP.
E. The network will be reached via a default route.
Answer: B. The"IA" stands for Interarea Route.
CCNP / BCMSN:
What protocol does VMPS use to listen to client requests?
A. TCP
B. UDP
C. SNMP
D. IP
E. IPX
Answer: B.
CCNP / BCRAN:
In the cable modem startup process, what will the DHCP request from the CMTS NOT contain?
A. An IP address for the cable modem.
B. An IP address for the PC attached to the modem.
C. The name of the DOCSIS config file.
D. The location of a TFTP server.
Answer: B. The PC has to send its own DHCP request to get an IP address.
CCNP / CIT:
The following is a partial output of what common troubleshooting command? Short answer, no choices given.
ROM: Bootstrap program is C2950 boot loader
SW1 uptime is 11 hours, 42 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-19.EA1c.bin"
Answer: This and other information - a lot of other information - can be found in the output of show version.
See you later tonight with more Cisco CCNA and CCNP practice questions!
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
You have no IP connectivity to a downstream router. What tool will allow you to determine which downstream router has a problem?
A. ping
B. traceroute
C. find
D. extended ping
Answer: B. ping shows you that you've got a problem; traceroute helps you determine which downstream router is causing the problem.
CCNP / BSCI:
What does the "IA" mean in the following route table ?
R1#show ip route ospf
2.0.0.0/32 is subnetted, 1 subnets
O IA 2.2.2.2 [110/65] via 172.12.123.2, 00:00:00, Serial0
A. The network is in the same area as R1.
B. The network is in another area.
C. The network was learned via route redistribution from RIP.
D. The network was learned via route redistribution from EIGRP.
E. The network will be reached via a default route.
Answer: B. The"IA" stands for Interarea Route.
CCNP / BCMSN:
What protocol does VMPS use to listen to client requests?
A. TCP
B. UDP
C. SNMP
D. IP
E. IPX
Answer: B.
CCNP / BCRAN:
In the cable modem startup process, what will the DHCP request from the CMTS NOT contain?
A. An IP address for the cable modem.
B. An IP address for the PC attached to the modem.
C. The name of the DOCSIS config file.
D. The location of a TFTP server.
Answer: B. The PC has to send its own DHCP request to get an IP address.
CCNP / CIT:
The following is a partial output of what common troubleshooting command? Short answer, no choices given.
ROM: Bootstrap program is C2950 boot loader
SW1 uptime is 11 hours, 42 minutes
System returned to ROM by power-on
System image file is "flash:/c2950-i6q4l2-mz.121-19.EA1c.bin"
Answer: This and other information - a lot of other information - can be found in the output of show version.
See you later tonight with more Cisco CCNA and CCNP practice questions!
To your Cisco certification success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments