A happy Wednesday to all! Here's today's first set of Cisco CCNA and CCNP practice questions:

CCNA:

Regarding access control lists, what is true of the term implicit deny?

A. If traffic isn't expressly permitted, it is implicitly denied.

B. Only standard ACLs end with an implicit deny.

C. ACLs containing only deny statements will not have an implicit deny.

D. All ACLs end with an implicit deny.


CCNP / BSCI:

After the initial exchange of LSAs, an OSPF router sends LSAs after detecting or being informed of a change in the network topology. Is there another time an OSPF-enabled router will send LSAs?

A. No.

B. Yes, every 30 minutes.

C. Yes. Depending on the network type, an OSPF router will send LSAs along with its Hello.

D. Yes, every 90 seconds.


CCNP / BCMSN:

Identify the true statements regarding CoS.

A. CoS is a L2 QoS value.

B. CoS is an L3 QoS value.

C. CoS can be assigned as data is switched from one port to another on the same switch.

D. CoS can be assigned as frames are sent across a trunk.


CCNP / BCRAN:

Identify the PRI linecode types.

A. b8zs

B. hdb3

C. t1

D. e1

E. sf

F. esf

G. ami

H. crc4


CCNP / CIT:

Examine the following partial output of show interface serial0.

R1#show interface serial0
Serial0 is down, line protocol is down
Hardware is HD64570
Internet address is 172.12.123.1/24 MTU 1500 bytes, BW 1544 Kbit, DLY 20000 usec, reliability 250/255, txload 1/255, rxload 1/255
Encapsulation FRAME-RELAY, loopback not set
Keepalive set (10 sec)

What is the most likely cause of the current issue?

A. The keepalive timer doesn't match the remote device.

B. The encapsulation type doesn't match the remote device.

C. The serial port is shut down.

D. The cable is disconnected from the serial port.

E. The frame mapping statements haven't been written and Inverse ARP has been turned off.


See you later today with more Cisco certification exam practice questions, and who knows what else!

Chris Bryant
CCIE #12933
www.thebryantadvantage.com

Comments

Popular posts from this blog