Here are Monday night's Cisco CCNA and CCNP practice questions!

CCNA:

A client calls you in an absolute panic. The client made some changes to the running config, saved them with "copy run start", and reloaded the router. The client tells you that the router is asking him something about a "configuration dialogue" instead of totally reloading. What is most likely the problem?

A. The flash memory is corrupt.

B. The NVRAM is corrupt.

C. The configuration was saved incorrectly.

D. The configuration register value is set incorrectly.

E. The RAM is corrupt.


CCNP / BSCI:

Short answer: What's the AD of ISIS?


CCNP / BCMSN:

You've just configured Uplinkfast on a switch. What is that switch's default priority?

A. 49,152

B. 4096

C. 32,768

D. Low enough to become the root bridge.

E. Configuring Uplinkfast doesn't change a switch's priority.


CCNP / BCRAN:

What output of show isdn status indicates that L2 is up and running?

A. TEI_ASSIGNED

B. DYNAMIC_TEI_ACTIVATED

C. MULTIPLE_FRAME_ESTABLISHED

D. DATA_LAYER_UP


CCNP / CIT:

Consider the following output of debug frame lmi. Which DLCIs are active?

*Mar 1 06:10:43.374: PVC IE 0x7 , length 0x6 , dlci 102, status 0x2 , bw 0
*Mar 1 06:10:43.374: PVC IE 0x7 , length 0x6 , dlci 103, status 0x2 , bw 0
*Mar 1 06:10:43.374: PVC IE 0x7 , length 0x6 , dlci 104, status 0x0 , bw 0

A. All of them.

B. None of them.

C. DLCI 102.

D. DLCI 103.

E. DLCI 104.

F. DLCIs 102 and 103.

G. DLCIs 103 and 104.

H. DLCIs 102 and 104.


See you Tuesday with the answers - and more Cisco CCNA and CCNP practice questions from The Bryant Advantage!

To your Cisco certification success,

Chris Bryant
CCIE #12933
www.thebryantadvantage.com