Here are Saturday night's CCNA and CCNP practice questions!

CCNA:

The default encapsulation type for a Cisco serial or BRI interface is what?

A. PPP

B. Frame Relay

C. Cisco-proprietary HDLC

D. Industry-standard HDLC


CCNP / BCSI:

You've put multihoming into effect in your BGP AS. The router that is communicating with your ISPs is low on memory and CPU. What type of routes would it benefit your router to receive from the ISP?

A. Default routes

B. Default routes and some more-specific routes

C. All the more-specific routes

D. BGP routes only


CCNP / BCMSN:

If inter-VLAN traffic is matched against a VLAN ACL, and no match is found, what term(s) best describes the action that will be taken?

A. permitted

B. filtered

C. denied

D. broadcast

E. multicast

F. unicast


CCNP / BCRAN:

What ISDN reference point is found between an NT1 device and the telco's line-termination equipment?

A. R

B. S

C. T

D. S/T

E. U

F. V


CCNP / CIT:

What command(s) resulted in the following output?

R1#
23:01:33: ICMP: echo reply rcvd, src 172.12.123.3, dst 172.12.123.1
23:01:33: ICMP: echo reply rcvd, src 172.12.123.3, dst 172.12.123.1
23:01:33: ICMP: echo reply rcvd, src 172.12.123.3, dst 172.12.123.1
23:01:33: ICMP: echo reply rcvd, src 172.12.123.3, dst 172.12.123.1
23:01:33: ICMP: echo reply rcvd, src 172.12.123.3, dst 172.12.123.1

A. ping

B. extended ping

C. debug ping

D. debug ip icmp

E. debug ip packet


See you Sunday with more Cisco certification exam practice questions!

To your Cisco certification success,

Chris Bryant
CCIE #12933
www.thebryantadvantage.com

Comments

Popular posts from this blog