Here are the answers to Friday's Cisco certification exam practice questions!
CCNA Exam:
Convert the hex value Afc into a decimal value.
Answer: We have 10 ("A") units of 256, 15 ("f") units of 16, and 12 ("c") units of 1.
That's 2560 + 240 + 12 = 2812.
CCNP Certification / BSCI Exam:
By default, what percentage of an interface's bandwidth can EIGRP use?
Answer: By default, EIGRP can use up to 50% of an interface's bandwidth.
CCNP Certification / BCMSN Exam:
Identify the true statements regarding a multilayer switch.
A. DHCP Snooping is enabled by default.
B. DHCP Snooping is disabled by default.
C. DHCP Snooping trusts all ports by default.
D. DHCP Snooping does not trust any port by default.
Answers: B, D. DHCP Snooping is disabled by default, and once enabled, all ports on the switch are considered untrusted.
CCNP Certification / ISCW Exam:
Low Latency Queueing (LLQ) creates a strict priority queue. What traffic should use this queue?
A. network control traffic
B. routing protocol traffic
C. voice traffic
D. Frame Relay keepalives
Answer: C. LLQ creates a priority queue that is intended for voice traffic transmission.
See you later today with a new set of Cisco questions, a new BCMSN tutorial on IP Source Guard, and more!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA Exam:
Convert the hex value Afc into a decimal value.
Answer: We have 10 ("A") units of 256, 15 ("f") units of 16, and 12 ("c") units of 1.
That's 2560 + 240 + 12 = 2812.
CCNP Certification / BSCI Exam:
By default, what percentage of an interface's bandwidth can EIGRP use?
Answer: By default, EIGRP can use up to 50% of an interface's bandwidth.
CCNP Certification / BCMSN Exam:
Identify the true statements regarding a multilayer switch.
A. DHCP Snooping is enabled by default.
B. DHCP Snooping is disabled by default.
C. DHCP Snooping trusts all ports by default.
D. DHCP Snooping does not trust any port by default.
Answers: B, D. DHCP Snooping is disabled by default, and once enabled, all ports on the switch are considered untrusted.
CCNP Certification / ISCW Exam:
Low Latency Queueing (LLQ) creates a strict priority queue. What traffic should use this queue?
A. network control traffic
B. routing protocol traffic
C. voice traffic
D. Frame Relay keepalives
Answer: C. LLQ creates a priority queue that is intended for voice traffic transmission.
See you later today with a new set of Cisco questions, a new BCMSN tutorial on IP Source Guard, and more!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments