Here's the first of two sets of Cisco CCNA, CCNP, and CompTIA Network+ questions for Saturday!

CCNA:

The LMI serves as a keepalive for which of the following?

A. ISDN

B. OSPF

C. RIPv2

D. Frame Relay

E. Switched trunks


Network+:

Which of the following can be used to allow hosts on different subnets to communicate?

A. Hub

B. Repeater

C. L2 switch

D. L3 switch

E. Router

F. Bridge


CCNP / BSCI:

Identify the true statements.

A. RIPv1 is classful, RIPv2 is not.

B. RIPv1 is classless, RIPv2 is not.

C. RIPv1 allows clear-text update authentication, RIPv2 does not.

D. RIPv2 allows clear-text update authentication, RIPv1 does not.

E. Both RIPv1 and V2 allow clear-text update authentication.

F. Both RIPv1 and V2 allow MD5 update authentication.

G. Both RIPv1 and V2 allow SHA update authentication.


CCNP / BCMSN:

Can a switch be configured to open an err-disabled port on its own, rather than require manual intervention?

A. No.

B. Yes, with the errdisable recovery command.

C. Yes, by configuring the switch to reboot during off-hours.

D. Yes, with the port autoopen command.


CCNP / BCRAN:

IKE Phase I can run in which of the following two modes?

A. Tunnel

B. Transport

C. Quick

D. Main

E. Aggressive

F. Passive


CCNP / CIT:

Short answers: What interface type(s) must use the frame interface-dlci command when configured for Frame Relay?


See you back here later today with another set of CCNA, CCNP, and Network+ questions!

To your certification exam success,

Chris Bryant
CCIE #12933
www.thebryantadvantage.com