Here are Monday's CCNA, CCNP, and Network+ practice exam questions!
CCNA:
A host boots up, and does not have an IP address assigned to it. Which of the following two protocols will assign an IP address to such a device?
A. DHCP
B. ARP
C. IARP
D. RARP
E. DNS
F. WINS
Network+ :
You're troubleshooting a Windows PC. Which of the following command will display the local PC's MAC address cache?
A. arp
B. arp -a
C. mac
D. mac -a
E. show cache
F. show cache - a
CCNP / BSCI:
If an IPv6 address begins with FF, what does that indicate?
A. Nothing in particular.
B. It's a multicast address.
C. It's a unicast address.
D. It's a broadcast address.
E. It's an anycast address.
CCNP / BCMSN:
Identify the true statements regarding the term jitter.
A. It's a problem primarily with data traffic.
B. It's a problem primarily with voice and video traffic.
C. It's caused by delays in the queue.
D. Configuring QoS is a good solution for jitter problems.
E. QoS is ineffective against jitter.
F. It's caused by legacy video creation equipment.
CCNP / BCRAN:
In feet, what's the distance limitation on ADSL?
A. 12,000
B. 16,000
C. 18,000
D. 20,000
E. 24,000
CCNP / CIT:
You've placed a new router into an HSRP standby group. You want it to be the Active router. What's the most efficient way to do this?
A. Give the new router a higher priority and reload the current Active router.
B. Give the new router a higher priority.
C. Give the new router a higher priority and configure it to preempt.
D. Give the new router a higher priority and configure the Active router to preempt.
See you later today with a bonus set of CCNA, CCNP, and Network+ questions, and a new Network+ free tutorial! (If you're new around here, I've got over 100 free tutorials over on the main site - check 'em out!)
To your certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
A host boots up, and does not have an IP address assigned to it. Which of the following two protocols will assign an IP address to such a device?
A. DHCP
B. ARP
C. IARP
D. RARP
E. DNS
F. WINS
Network+ :
You're troubleshooting a Windows PC. Which of the following command will display the local PC's MAC address cache?
A. arp
B. arp -a
C. mac
D. mac -a
E. show cache
F. show cache - a
CCNP / BSCI:
If an IPv6 address begins with FF, what does that indicate?
A. Nothing in particular.
B. It's a multicast address.
C. It's a unicast address.
D. It's a broadcast address.
E. It's an anycast address.
CCNP / BCMSN:
Identify the true statements regarding the term jitter.
A. It's a problem primarily with data traffic.
B. It's a problem primarily with voice and video traffic.
C. It's caused by delays in the queue.
D. Configuring QoS is a good solution for jitter problems.
E. QoS is ineffective against jitter.
F. It's caused by legacy video creation equipment.
CCNP / BCRAN:
In feet, what's the distance limitation on ADSL?
A. 12,000
B. 16,000
C. 18,000
D. 20,000
E. 24,000
CCNP / CIT:
You've placed a new router into an HSRP standby group. You want it to be the Active router. What's the most efficient way to do this?
A. Give the new router a higher priority and reload the current Active router.
B. Give the new router a higher priority.
C. Give the new router a higher priority and configure it to preempt.
D. Give the new router a higher priority and configure the Active router to preempt.
See you later today with a bonus set of CCNA, CCNP, and Network+ questions, and a new Network+ free tutorial! (If you're new around here, I've got over 100 free tutorials over on the main site - check 'em out!)
To your certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments