Here are Tuesday's CCNA, CCNP, and Network+ practice questions!
CCNA:
A client calls you in an absolute panic. The client made some changes to the running config, saved them with copy run start, and reloaded the router. The client tells you that the router is asking him something about a "configuration dialogue" instead of totally reloading. What is most likely the problem?
A. The flash memory is corrupt.
B. The configuration was saved incorrectly.
C. There is no problem - have the client answer "yes" to the question on the router console, that will load the startup configuration.
D. The configuration register is not set to the desired value.
Network+:
Identify the devices that run at the OSI model's Layer 2.
A. hub
B. repeater
C. switch
D. router
E. NIC
F. Wireless Access Points
CCNP / BSCI:
What is RIP's default behavior regarding what update versions to send and receive?
A. Send 1 and 2, accept 1.
B. Send 1, accept 1 and 2.
C. Send 1 and 2, accept 2.
D. Send 2, accept 1 and 2.
CCNP / BCRAN:
IKE is a hybrid protocol. It's a combination of what three protocols?
A. SKEME
B. ISAKMP
C. IPSec
D. OSPF
E. EIGRP
F. Oakley
CCNP / BCMSN:
You want to use the strict priority queue for voice traffic on port gig 0/2. What has to be done to enable and use this queue?
A. Nothing, since it's a default queue.
B. It is a default queue, but it has to be enabled with priority-queue out.
C. Create the queue with ip priority-queue and map the priority traffic to that queue.
D. You can't use priority queueing on a Gigabit Ethernet interface.
CCNP / CIT:
Identify the true statements regarding "regular" ping.
A. Five ICMP Echo Requests are sent.
B. The exit interface is the source interface, and this cannot be changed.
C. The source interface of the ping can be changed.
D. The number of echo requests can be set at the time of the ping.
See you later today with a new motivational article, a new Network+ tutorial, and who knows what else! :)
To your certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
A client calls you in an absolute panic. The client made some changes to the running config, saved them with copy run start, and reloaded the router. The client tells you that the router is asking him something about a "configuration dialogue" instead of totally reloading. What is most likely the problem?
A. The flash memory is corrupt.
B. The configuration was saved incorrectly.
C. There is no problem - have the client answer "yes" to the question on the router console, that will load the startup configuration.
D. The configuration register is not set to the desired value.
Network+:
Identify the devices that run at the OSI model's Layer 2.
A. hub
B. repeater
C. switch
D. router
E. NIC
F. Wireless Access Points
CCNP / BSCI:
What is RIP's default behavior regarding what update versions to send and receive?
A. Send 1 and 2, accept 1.
B. Send 1, accept 1 and 2.
C. Send 1 and 2, accept 2.
D. Send 2, accept 1 and 2.
CCNP / BCRAN:
IKE is a hybrid protocol. It's a combination of what three protocols?
A. SKEME
B. ISAKMP
C. IPSec
D. OSPF
E. EIGRP
F. Oakley
CCNP / BCMSN:
You want to use the strict priority queue for voice traffic on port gig 0/2. What has to be done to enable and use this queue?
A. Nothing, since it's a default queue.
B. It is a default queue, but it has to be enabled with priority-queue out.
C. Create the queue with ip priority-queue and map the priority traffic to that queue.
D. You can't use priority queueing on a Gigabit Ethernet interface.
CCNP / CIT:
Identify the true statements regarding "regular" ping.
A. Five ICMP Echo Requests are sent.
B. The exit interface is the source interface, and this cannot be changed.
C. The source interface of the ping can be changed.
D. The number of echo requests can be set at the time of the ping.
See you later today with a new motivational article, a new Network+ tutorial, and who knows what else! :)
To your certification exam success,
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments