Here are the answers to yesterday's Cisco CCNA and CCNP practice questions. More questions will be posted later today!
CCNA:
The length of which STP stages are determined by the FWD_DEL value? Choose all that apply.
A. blocking
B. listening
C. learning
D. forwarding
E. disabled
Answer: B, C. The FWD_DEL value, more commonly known as Forward Delay, represents the length of the listening and learning stages.
CCNP / BSCI:
You want one of your IGRP routers to advertise a default route throughout the network. Which of the following is the best command to use to do this?
A. default-information originate
B. default-information originate always
C. ip default-gateway
D. ip default-network
E. redistribute static (after creating a default static route)
Answer: D. The only way to propagated default route in IGRP is with the ip default-network command. IGRP doesn't understand a route to 0.0.0.0, so the static default route is out. The default-information originate commands are OSPF commands, and ip default-gateway should be used only when IP routing is turned off.
CCNP / BCMSN:
What term describes a logical grouping of access- and distribution-layer switches?
A. Core block
B. Switch block
C. Server Farm block
D. Network Management block
E. Distribution block
Answer: B. That terms describes the switch block.
CCNP / BCRAN:
What command would apply the policy map shown below to the serial interface? Short answer, no choices given. Apply the policy map to outbound traffic.
R2(config)#policy-map VOICE
R2(config-pmap)#class VOICE_TRAFFIC_PRIORITY
R2(config-pmap-c)#priority 45
R2(config-pmap-c)#class class-default
R2(config-pmap-c)#fair-queue
R2(config-pmap-c)#interface serial0
R2(config-if)#
Answer: The required command is service-policy output VOICE.
See you later today with more Cisco CCNA and CCNP practice questions!
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
The length of which STP stages are determined by the FWD_DEL value? Choose all that apply.
A. blocking
B. listening
C. learning
D. forwarding
E. disabled
Answer: B, C. The FWD_DEL value, more commonly known as Forward Delay, represents the length of the listening and learning stages.
CCNP / BSCI:
You want one of your IGRP routers to advertise a default route throughout the network. Which of the following is the best command to use to do this?
A. default-information originate
B. default-information originate always
C. ip default-gateway
D. ip default-network
E. redistribute static (after creating a default static route)
Answer: D. The only way to propagated default route in IGRP is with the ip default-network command. IGRP doesn't understand a route to 0.0.0.0, so the static default route is out. The default-information originate commands are OSPF commands, and ip default-gateway should be used only when IP routing is turned off.
CCNP / BCMSN:
What term describes a logical grouping of access- and distribution-layer switches?
A. Core block
B. Switch block
C. Server Farm block
D. Network Management block
E. Distribution block
Answer: B. That terms describes the switch block.
CCNP / BCRAN:
What command would apply the policy map shown below to the serial interface? Short answer, no choices given. Apply the policy map to outbound traffic.
R2(config)#policy-map VOICE
R2(config-pmap)#class VOICE_TRAFFIC_PRIORITY
R2(config-pmap-c)#priority 45
R2(config-pmap-c)#class class-default
R2(config-pmap-c)#fair-queue
R2(config-pmap-c)#interface serial0
R2(config-if)#
Answer: The required command is service-policy output VOICE.
See you later today with more Cisco CCNA and CCNP practice questions!
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments