Here are the answers to the Cisco certification practice exam questions posted here on Sunday!
CCNA And CCENT Certification:
What are the default settings for port security for each of the following?
A. number of secure MAC addresses
B. security mode
C. action taken upon receipt of a non-secure MAC address
Answers: The defaults are ..... one secure MAC address, shutdown mode, and the port will be put into err-disabled mode and a syslog message generated.
CCNP Certification / BSCI Exam:
In BGP, what command would double the default weight of all routes received from a neighbor at 172.12.1.1?
Answer: Well, I meant to ask about another BGP metric, since the default weight of a route received from another router is zero. So if you caught that - great work! :)
CCNP Certification / BCMSN Exam:
You've just connected two 2950 switches with a crossover cable. Assuming all ports are at their default setting, what else do you need to do for a trunk to form?
Answer: Nothing, since both ports will be in dynamic desirable trunking mode by default.
CCNP Certification / ISCW Exam & CCNA Security:
What are the two "subinterfaces" created on an Ethernet port running dot1x-based authentication?
Answer: The controlled port and the uncontrolled port.
Fresh questions later today! Scroll down in the blog for more of my latest free Cisco training videos and additions to my exclusive YouTube channel!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA And CCENT Certification:
What are the default settings for port security for each of the following?
A. number of secure MAC addresses
B. security mode
C. action taken upon receipt of a non-secure MAC address
Answers: The defaults are ..... one secure MAC address, shutdown mode, and the port will be put into err-disabled mode and a syslog message generated.
CCNP Certification / BSCI Exam:
In BGP, what command would double the default weight of all routes received from a neighbor at 172.12.1.1?
Answer: Well, I meant to ask about another BGP metric, since the default weight of a route received from another router is zero. So if you caught that - great work! :)
CCNP Certification / BCMSN Exam:
You've just connected two 2950 switches with a crossover cable. Assuming all ports are at their default setting, what else do you need to do for a trunk to form?
Answer: Nothing, since both ports will be in dynamic desirable trunking mode by default.
CCNP Certification / ISCW Exam & CCNA Security:
What are the two "subinterfaces" created on an Ethernet port running dot1x-based authentication?
Answer: The controlled port and the uncontrolled port.
Fresh questions later today! Scroll down in the blog for more of my latest free Cisco training videos and additions to my exclusive YouTube channel!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments