It's Wednesday, September 17, and here are your free Cisco certification exam training questions for today!


CCNA Certification And CCENT Certification:

What command resulted in the following output?

SW2# ?
VTP Version : 2
Configuration Revision : 2
Maximum VLANs supported locally : 64
Number of existing VLANs : 6
VTP Operating Mode : Server
VTP Domain Name : CCNA



CCNA Security Certification / CCNP ISCW Exam:

Briefly describe a man-in-the-middle attack and propose at least one solution for this network attack.


CCNA Wireless:

Identify the true statements regarding the RSSI.

A. Can be used to compare values from different vendors

B. Cannot accurately compare values from different vendors

C. Measures signal strength

D. Measures direction of the signal

E. Is a Cisco-proprietary value

CCNA Voice:

Identify the true statements regarding PLAR.

A. Requires only a single number to be dialed to reach the intended destination

B. No number needs to be dialed to reach the destination

C. Dynamically creates dial peer statements for POTS configurations only

D. Dynamically created session target statements for VOIP configurations only

CCNP Certification / BSCI Exam:

Short answer: What is the OUI of any multicast MAC address?

CCNP Certification / BCMSN Exam:

What is being configured in the following configuration?

MLS(config-slb-sfarm)# real 210.1.1.11

MLS(config-slb-real)# inservice



CCNP / ONT Exam:

Identify the true statements regarding LEAP.

A. It's Cisco-proprietary

B. Non-Cisco vendors cannot support LEAP in any way

C. Uses strong one-way authentication

D. Uses a RADIUS server

I'll post the answers on Thursday, September 18!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/