It's Thursday, September 17, and it's time for your free Cisco certification practice exam questions!

Be sure to read today's other blog posts for links to my new YouTube videos and learn how to subscribe to my YouTube channel!

All of today's questions are short answer. Let's get started!


CCNA Certification And CCENT Certification:

Short answer: You need to find out which end of a DTE/DCE cable is connected to a Cisco router. Problem is, the router cabinet is so packed with cables that you can't begin to see the lettering on the cable. (Not that this would ever happen, right?)

What command will give you this information, assuming the cable is connected to Serial0?


CCNA Security Certification / CCNP ISCW Exam:

Name two major differences between RADIUS and TACACS+.




CCNP Certification / BSCI Exam:

What command resulted in the following output?

R3# ?

OSPF Process 1 internal Routing Table

Codes: i - Intra-area route, I - Inter-area route

i 1.1.1.1 [64] via 172.12.123.1, Serial0, ABR/ASBR, Area 0, SPF 38
i 2.2.2.2 [64] via 172.12.123.2, Serial0, ABR, Area 0, SPF 38

CCNP Certification / BCMSN Exam:

You want to initialize a Cisco switch - totally. What commands should you run?


CCNP / ONT Exam:

Name the two fixed-length processing delays, the two variable-length processing delay, and a brief description of each.

I'll have the answers for you on Friday, September 19. Look for more links to practice exams in the blog posts from the last few days!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/