Here are the answers to Thursday's Cisco exam practice questions!
CCNA Certification:
What is the range of Class B RFC 1918 addresses?
Answer: 172.16.0.0 /12.
CCNP Certification / BSCI Exam:
ISIS assigns redistributed routes a metric of ____________.
Answer: The seed metric for ISIS is zero.
CCNP Certification / BCMSN Exam:
In a dot1q tunneling scheme, what switches must be configured with the "switchport mode dot1q tunnel" command?
A. The customer network edge switches.
B. All switches in the service provider network.
C. The service provider edge switches.
D. Both the customer network edge and service provider edge switches.
Answer: C. Only the interfaces on the service provider edge switches that will receive traffic over the trunk from the customer network must be configured with "switchport mode dot1q tunnel".
CCNP Certification / ISCW Exam:
Which of the following Cisco router services are enabled by default?
A. CDP (globally)
B. FTP Server
C. TFTP Server
D. Network Time Protocol (NTP)
E. TCP small servers
F. UDP small servers
Answers: A, E, F. CDP, TCP small servers, and UDP small servers are all enabled by default. FTP Server, TFTP Server, and NTP are disabled by default.
CCNP Certification / ONT Exam:
Which of the following are actions that can be taken by class-based traffic policing?
A. Drop
B. Violate
C. Exceed
D. Set
E. Transmit
F. Conform
Answer: A, D, E. Bit of a picky question here, but there's an important difference between actions and conditions.
The conditions for class-based traffic policing are Conform, Exceed, and Violate.
The actions taken when those conditions are or are not met are Drop, Transmit, and Set.
New questions posted later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA Certification:
What is the range of Class B RFC 1918 addresses?
Answer: 172.16.0.0 /12.
CCNP Certification / BSCI Exam:
ISIS assigns redistributed routes a metric of ____________.
Answer: The seed metric for ISIS is zero.
CCNP Certification / BCMSN Exam:
In a dot1q tunneling scheme, what switches must be configured with the "switchport mode dot1q tunnel" command?
A. The customer network edge switches.
B. All switches in the service provider network.
C. The service provider edge switches.
D. Both the customer network edge and service provider edge switches.
Answer: C. Only the interfaces on the service provider edge switches that will receive traffic over the trunk from the customer network must be configured with "switchport mode dot1q tunnel".
CCNP Certification / ISCW Exam:
Which of the following Cisco router services are enabled by default?
A. CDP (globally)
B. FTP Server
C. TFTP Server
D. Network Time Protocol (NTP)
E. TCP small servers
F. UDP small servers
Answers: A, E, F. CDP, TCP small servers, and UDP small servers are all enabled by default. FTP Server, TFTP Server, and NTP are disabled by default.
CCNP Certification / ONT Exam:
Which of the following are actions that can be taken by class-based traffic policing?
A. Drop
B. Violate
C. Exceed
D. Set
E. Transmit
F. Conform
Answer: A, D, E. Bit of a picky question here, but there's an important difference between actions and conditions.
The conditions for class-based traffic policing are Conform, Exceed, and Violate.
The actions taken when those conditions are or are not met are Drop, Transmit, and Set.
New questions posted later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments