Here are Tuesday's Cisco CCNA and CCNP certification exam practice questions!
CCNA Certification:
Short answer: What command will show you only the routes that have been learned by a router via RIP?
CCNP Certification / BSCI Exam:
What is true of the following pair of IPv6 addresses? 0:0:0:0:0:0:0:1 and ::1
A. They represent the same address.
B. They represent different addresses.
C. At least one is a loopback address.
D. At least one is an anycast address.
E. At least one is a broadcast address.
CCNP Certification / BCMSN Exam:
Short answer: What is the main purpose of IEEE 802.3ac?
CCNP Certification / ISCW Exam:
Which of the following operate on the Control Plane?
A. routing table
B. FIB
C. label distribution protocol
D. label information base
E. LFIB
F. routing protocol
CCNP Certification / ONT Exam:
Short answer: Name the queues used by Priority Queuing, and give the default capacity of each queue.
Answers will be posted Wednesday!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA Certification:
Short answer: What command will show you only the routes that have been learned by a router via RIP?
CCNP Certification / BSCI Exam:
What is true of the following pair of IPv6 addresses? 0:0:0:0:0:0:0:1 and ::1
A. They represent the same address.
B. They represent different addresses.
C. At least one is a loopback address.
D. At least one is an anycast address.
E. At least one is a broadcast address.
CCNP Certification / BCMSN Exam:
Short answer: What is the main purpose of IEEE 802.3ac?
CCNP Certification / ISCW Exam:
Which of the following operate on the Control Plane?
A. routing table
B. FIB
C. label distribution protocol
D. label information base
E. LFIB
F. routing protocol
CCNP Certification / ONT Exam:
Short answer: Name the queues used by Priority Queuing, and give the default capacity of each queue.
Answers will be posted Wednesday!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments