Here are today's Cisco certification exam practice questions! I'll be adding ISCW and ONT questions very soon!
CCNA:
Host A and Host B are in VLAN 1. Host C and Host D are in VLAN 10. Host A sends a broadcast. How many other hosts will receive it?
A. None of them
B. One
C. Two
D. Three
CCNP / BSCI:
What exit interface will traffic destined for 210.1.1.1 use, according to this routing table excerpt?
O 210.1.1.0 /24 [110 / 20] via ethernet0
R 210.1.1.0/24 [120/3] via ethernet1
I 210.1.1.0/25 [100/2] via serial0
D EX 210.1.1.0/23 [90/4899390] via serial1
CCNP / BCMSN:
Which of the following will reset a switch's revision number back to zero?
A. Erase the vlan.dat file and reload the switch.
B. Change the VTP domain name to a nonexistent domain, then switch it back.
C. Power the switch down, wait one minute, and enter the BREAK sequence when reloading.
D. Change the VTP mode to Transparent and then back to server.
Answers will be posted tomorrow!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA:
Host A and Host B are in VLAN 1. Host C and Host D are in VLAN 10. Host A sends a broadcast. How many other hosts will receive it?
A. None of them
B. One
C. Two
D. Three
CCNP / BSCI:
What exit interface will traffic destined for 210.1.1.1 use, according to this routing table excerpt?
O 210.1.1.0 /24 [110 / 20] via ethernet0
R 210.1.1.0/24 [120/3] via ethernet1
I 210.1.1.0/25 [100/2] via serial0
D EX 210.1.1.0/23 [90/4899390] via serial1
CCNP / BCMSN:
Which of the following will reset a switch's revision number back to zero?
A. Erase the vlan.dat file and reload the switch.
B. Change the VTP domain name to a nonexistent domain, then switch it back.
C. Power the switch down, wait one minute, and enter the BREAK sequence when reloading.
D. Change the VTP mode to Transparent and then back to server.
Answers will be posted tomorrow!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments