Here are today's Cisco certification practice questions!
CCNA:
By default, what traffic resets the dialer idle-timeout value?
A. No traffic.
B. All traffic.
C. All interesting traffic.
D. All IP traffic.
E. All traffic defined by the "dialer-list" command.
F. All traffic defined by the "dialer-group" command.
CCNP / BSCI:
Short answer: Cisco's default behavior with BGP transit ASes is to not advertise a route learned from an eBGP peer to another AS until all the routers in the transit AS know about the route. The full unabbreviated command to disable this behavior is ____________.
CCNP / BCMSN:
Regarding its revision number, what should you do to a switch before installing it into the network?
A. Make sure the revision number is zero.
B. Make sure the revision number is one.
C. Make sure the revision number is removed from NVRAM.
D. The revision number does not matter.
Answers will be posted on Friday!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA:
By default, what traffic resets the dialer idle-timeout value?
A. No traffic.
B. All traffic.
C. All interesting traffic.
D. All IP traffic.
E. All traffic defined by the "dialer-list" command.
F. All traffic defined by the "dialer-group" command.
CCNP / BSCI:
Short answer: Cisco's default behavior with BGP transit ASes is to not advertise a route learned from an eBGP peer to another AS until all the routers in the transit AS know about the route. The full unabbreviated command to disable this behavior is ____________.
CCNP / BCMSN:
Regarding its revision number, what should you do to a switch before installing it into the network?
A. Make sure the revision number is zero.
B. Make sure the revision number is one.
C. Make sure the revision number is removed from NVRAM.
D. The revision number does not matter.
Answers will be posted on Friday!
To your certification exam success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments