Welcome back! It's Monday, July 21, and here are your Cisco certification training questions for today!
CCNA Wireless and Voice questions join the daily question posts on August 1!
CCNA Certification:
In the following show cdp output, which values have been changed from their default, if any?
Router1#show cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPv2 advertisements is enabled
Answer: None of the CDP defaults have been changed.
CCENT Certification:
Examine the following ip route command and identify the true statements.
R1(config)#ip route 30.0.0.0 255.0.0.0 ethernet1
A. The network route shown is invalid.
B. The network mask shown should be in wildcard mask form (0.0.0.255)
C. The ethernet1 interface indicated is on the local router.
D. The ethernet1 interface indicated is on the next-hop router.
E. This is a default static route.
Answers: C. The ip route command shown is valid, and the mask is shown in correct form. The specified interface is the local exit interface. This is not a default static route - such an ip route statement would have all zeroes for the network and the mask.
CCNA Security Certification / CCNP ISCW Exam:
What are the two options you should expect to see IOS Help display in the following command?
R1(config)#ip tcp intercept mode ?
Answer: You can run TCP interfcept in intercept or passive mode.
CCNP Certification / BSCI Exam:
Identify the correct statements regarding the EIGRP topology table.
A. There can be multiple successors.
B. There can be multiple feasible successors.
C. There can be only one successor.
D. There can be only one feasible successor.
E. There are no successors in this table.
F. There are no feasible successors in this table.
Answer: A, D. You can have multiple successor and feasible successor routes in the EIGRP topology table.
CCNP Certification / BCMSN Exam:
What command will allow a port to carry only traffic for VLANs 1, 100, and 200?
Answer: Use the following configuration to carry this task out. You don't have to specify VLAN 1, since you can't delete or block traffic on that specific VLAN to begin with.
interface FastEthernet0/12
switchport trunk allowed vlan 100,200
CCNP / ONT Exam:
Identify the true statements regarding traffic policing.
A. Can drop out-of-profile packets or re-mark the traffic with a new value
B. All out-of-profile packets are dropped
C. Only incoming traffic can be policed
D. Only outgoing traffic can be policed
E. Both incoming and outgoing traffic can be policed
Answers: A, E. With traffic policing, you have the option of dropping packets or re-marking them. You can also police traffic as it enters or exits the router.
I'll have brand-new questions for you later today, as well as a new CCNA Security tutorial! Click that link to read the first part of this ongoing series, and take the steps necessary to get started on the most important Cisco certification to come along in years - the CCNA Security certification!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCNA Wireless and Voice questions join the daily question posts on August 1!
CCNA Certification:
In the following show cdp output, which values have been changed from their default, if any?
Router1#show cdp
Global CDP information:
Sending CDP packets every 60 seconds
Sending a holdtime value of 180 seconds
Sending CDPv2 advertisements is enabled
Answer: None of the CDP defaults have been changed.
CCENT Certification:
Examine the following ip route command and identify the true statements.
R1(config)#ip route 30.0.0.0 255.0.0.0 ethernet1
A. The network route shown is invalid.
B. The network mask shown should be in wildcard mask form (0.0.0.255)
C. The ethernet1 interface indicated is on the local router.
D. The ethernet1 interface indicated is on the next-hop router.
E. This is a default static route.
Answers: C. The ip route command shown is valid, and the mask is shown in correct form. The specified interface is the local exit interface. This is not a default static route - such an ip route statement would have all zeroes for the network and the mask.
CCNA Security Certification / CCNP ISCW Exam:
What are the two options you should expect to see IOS Help display in the following command?
R1(config)#ip tcp intercept mode ?
Answer: You can run TCP interfcept in intercept or passive mode.
CCNP Certification / BSCI Exam:
Identify the correct statements regarding the EIGRP topology table.
A. There can be multiple successors.
B. There can be multiple feasible successors.
C. There can be only one successor.
D. There can be only one feasible successor.
E. There are no successors in this table.
F. There are no feasible successors in this table.
Answer: A, D. You can have multiple successor and feasible successor routes in the EIGRP topology table.
CCNP Certification / BCMSN Exam:
What command will allow a port to carry only traffic for VLANs 1, 100, and 200?
Answer: Use the following configuration to carry this task out. You don't have to specify VLAN 1, since you can't delete or block traffic on that specific VLAN to begin with.
interface FastEthernet0/12
switchport trunk allowed vlan 100,200
CCNP / ONT Exam:
Identify the true statements regarding traffic policing.
A. Can drop out-of-profile packets or re-mark the traffic with a new value
B. All out-of-profile packets are dropped
C. Only incoming traffic can be policed
D. Only outgoing traffic can be policed
E. Both incoming and outgoing traffic can be policed
Answers: A, E. With traffic policing, you have the option of dropping packets or re-marking them. You can also police traffic as it enters or exits the router.
I'll have brand-new questions for you later today, as well as a new CCNA Security tutorial! Click that link to read the first part of this ongoing series, and take the steps necessary to get started on the most important Cisco certification to come along in years - the CCNA Security certification!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments