It's Friday, July 25, and here are your Cisco certification practice exam questions for today!

Like yesterday, all of today's questions are short answer.

Be sure to read today's other blog posts for links to brand-new CCNA Security practice exams and tutorials!


CCNA Certification:

What command results in the following output?

R3#
00:11:37: RIP: received v2 update from 172.12.123.1 on Serial0
00:11:37: 172.12.123.0/24 via 0.0.0.0 in 1 hops



CCENT Certification:

What's the basic purpose of the logging synchronous command?


CCNA Security Certification / CCNP ISCW Exam:

When configuring a basic firewall in SDM, what are the three options for the preconfigured security levels? Can you create your own custom security levels?


CCNP Certification / BSCI Exam:

In the following output, describe....

1. Why we would use this command in the first place

2. The meaning of "100"

3. The meaning of "300"

4. The default setting for this particular value, and what we're changing it to


R3(config-if)#ip bandwidth-percent eigrp 100 300


CCNP Certification / BCMSN Exam:

What router redundancy protocol is defined by RFC 2281?



CCNP / ONT Exam:

IntServ uses RSVP, but DiffServ does not. What does DiffServ use in place of RSVP?



I'll have the answers for you on Saturday, July 25!

Visit my CCNA Security Certification Resource Page for new practice exams and fully-illustrated tutorials!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/