Here are some CCNA and CCNP practice questions to get you going!
CCNA:
You want to cut in half the number of paths RIP uses by default for equal-cost load-sharing. What command will do this? Short answer, no choices given!
CCNP / BSCI:
A BGP router has two possible paths to a remote destination. The weights are unchanged from the default. What is the next deciding factor?
A. LOCAL_PREF, with the highest value preferred.
B. LOCAL_PREF, with the lowest value preferred.
C. AS_PATH, with the shortest value preferred.
D. AS_PATH, with the longest value preferred.
CCNP / BCMSN:
Where does a VMPS server keep its MAC address database?
A. On a TFTP server.
B. In its ROM.
C. In its RAM.
D. In its NVRAM.
Thanks for reading!
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
CCNA:
You want to cut in half the number of paths RIP uses by default for equal-cost load-sharing. What command will do this? Short answer, no choices given!
CCNP / BSCI:
A BGP router has two possible paths to a remote destination. The weights are unchanged from the default. What is the next deciding factor?
A. LOCAL_PREF, with the highest value preferred.
B. LOCAL_PREF, with the lowest value preferred.
C. AS_PATH, with the shortest value preferred.
D. AS_PATH, with the longest value preferred.
CCNP / BCMSN:
Where does a VMPS server keep its MAC address database?
A. On a TFTP server.
B. In its ROM.
C. In its RAM.
D. In its NVRAM.
Thanks for reading!
Chris Bryant
CCIE #12933
www.thebryantadvantage.com
Comments