It's Thursday, October 2, and here are your Cisco certification exam training questions for today!
CCNA Certification And CCENT Certification:
You want a Cisco 2950 switch's port 0/12 to go into err-disabled mode if a host with a MAC address other than 11-22-33-44-55-66 connects to that port. Assuming the port is already in the correct VLAN, what is the full configuration to make this happen?
CCNA Security Certification / CCNP ISCW Exam:
Name five of the Task buttons available in the Configure section of SDM.
Give the OSPF costs for the following port speeds.
A. 56 kbps
B. T1
C. FDDI
D. 100 MBPS Ethernet
CCNA Certification And CCENT Certification:
You want a Cisco 2950 switch's port 0/12 to go into err-disabled mode if a host with a MAC address other than 11-22-33-44-55-66 connects to that port. Assuming the port is already in the correct VLAN, what is the full configuration to make this happen?
CCNA Security Certification / CCNP ISCW Exam:
Name five of the Task buttons available in the Configure section of SDM.
CCNP Certification / BSCI Exam:
Give the OSPF costs for the following port speeds.
A. 56 kbps
B. T1
C. FDDI
D. 100 MBPS Ethernet
CCNP Certification / BCMSN Exam:
Which of the following QoS methods use RSVP by default?
A. best-effort
B. IntServ
C. DiffServ
D. all of these
E. none of these
Identify the true statements regarding traffic shaping.
A. Can be configured to shape outgoing flows only
B. Can be used to shape incoming and outgoing flows
C. Generally has more TCP retransmissions than traffic policing
D. Usually has fewer TCP retransmissions than traffic policing
E. Supports traffic marking
F. Does not support traffic marking
Answers right here on Friday, October 3!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments