Here are the answers to your free Cisco certification exam training questions for Tuesday, November 6!
CCENT Certification:
Identify the devices that run at the bottommost layer of the OSI model.
A. router
B. switch
C. hub
D. wireless access point
E. repeater
Answers: C, E. Both hubs and repeaters run at Layer 1 of the OSI model, the Physical layer.
CCNA Certification Exam:
Identify the frame relay encapsulation options.
A. Cisco (default)
B. IETF (default)
C. ANSI (default)
D. Cisco
E. IETF
F. ANSI
Answer: A, E. The encapsulation options are cisco and ietf, and cisco is the default.
CCNP Certification / BSCI Exam:
Short answer: What LSA type indicates the location of the ASBR?
Answer: Type 4 LSAs indicate the route to the ASBR.
CCNP Certification / BCMSN Exam:
Which of the following is true of the "collapsed core" design?
A. There is no dedicated core switch.
B. There is no dedicated distribution-layer switch.
C. There is no dedicated access-layer switch.
D. A single switch will handle the tasks of all three of these layers.
Answers: A, B. The term "collapsed core" refers to the middle two layers of the Cisco three-layer switching model - core and distribution - running on the same physical switches.
CCNP Certification / ISCW Exam:
Short answer: What term is given to the network attack that occurs when an intruder gathers information in preparation for a larger attack in the future?
Answer: That is a network reconnaissance attack.
CCNP Certification / ONT Exam:
Short answer: WRED uses one of what two values in order to make a decision on what traffic to drop in case of network congestion?
Answer: WRED can use the DSCP (Differentiated Services Code Point) or IP Precedence values to make this decision.
New questions posted later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCENT Certification:
Identify the devices that run at the bottommost layer of the OSI model.
A. router
B. switch
C. hub
D. wireless access point
E. repeater
Answers: C, E. Both hubs and repeaters run at Layer 1 of the OSI model, the Physical layer.
CCNA Certification Exam:
Identify the frame relay encapsulation options.
A. Cisco (default)
B. IETF (default)
C. ANSI (default)
D. Cisco
E. IETF
F. ANSI
Answer: A, E. The encapsulation options are cisco and ietf, and cisco is the default.
CCNP Certification / BSCI Exam:
Short answer: What LSA type indicates the location of the ASBR?
Answer: Type 4 LSAs indicate the route to the ASBR.
CCNP Certification / BCMSN Exam:
Which of the following is true of the "collapsed core" design?
A. There is no dedicated core switch.
B. There is no dedicated distribution-layer switch.
C. There is no dedicated access-layer switch.
D. A single switch will handle the tasks of all three of these layers.
Answers: A, B. The term "collapsed core" refers to the middle two layers of the Cisco three-layer switching model - core and distribution - running on the same physical switches.
CCNP Certification / ISCW Exam:
Short answer: What term is given to the network attack that occurs when an intruder gathers information in preparation for a larger attack in the future?
Answer: That is a network reconnaissance attack.
CCNP Certification / ONT Exam:
Short answer: WRED uses one of what two values in order to make a decision on what traffic to drop in case of network congestion?
Answer: WRED can use the DSCP (Differentiated Services Code Point) or IP Precedence values to make this decision.
New questions posted later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments