Here are the answers to your Cisco certification exam training questions for Wednesday, November 7!
CCENT Certification:
What is the range of multicast MAC addresses?
Answer: 01-00-5e-00-00-00 through 01-00-5e-7f-ff-ff. Watch that 7! :)
CCNA Certification:
Arrange the following route types in order of believability, from best to worst: static route, directly connected network, OSPF route, RIPv1 route, RIPv2 route, IGRP, EIGRP route.
Answer: The administrative distance is the measure of believability; the lower the AD, the more trustworthy the route. From lowest to highest:
Directly connected (0)
Static route (1, *possibly* 0, depending on configuration)
EIGRP (90)
IGRP (100)
OSPF (110)
RIP v1 and v2 (120)
CCNP Certification / BSCI Exam:
You want to view the LSAs on an OSPF-enabled router, along with the amount of time since the last LSA for each link was received. What command will give you this vital troubleshooting information?
Answer: show ip ospf database.
CCNP Certification / BCMSN Exam:
What two blocks of the Enterprise Composite Network Model work together to bring WAN connectivity and Internet access to users?
Answer: Enterprise Edge and Service Provider Edge.
CCNP Certification / ISCW Exam:
You want to display a message to users who connect to your router via Telnet. What command will you use to do so?
Answer: Use the banner login command.
CCNP Certification / ONT Exam:
By default, Cisco routers support three different algorithms for payload compression. What are they?
Answer: Stacker, Predictor, and M**ros*ft Point-to-Point Compression. ;)
Fresh-baked questions coming up later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCENT Certification:
What is the range of multicast MAC addresses?
Answer: 01-00-5e-00-00-00 through 01-00-5e-7f-ff-ff. Watch that 7! :)
CCNA Certification:
Arrange the following route types in order of believability, from best to worst: static route, directly connected network, OSPF route, RIPv1 route, RIPv2 route, IGRP, EIGRP route.
Answer: The administrative distance is the measure of believability; the lower the AD, the more trustworthy the route. From lowest to highest:
Directly connected (0)
Static route (1, *possibly* 0, depending on configuration)
EIGRP (90)
IGRP (100)
OSPF (110)
RIP v1 and v2 (120)
CCNP Certification / BSCI Exam:
You want to view the LSAs on an OSPF-enabled router, along with the amount of time since the last LSA for each link was received. What command will give you this vital troubleshooting information?
Answer: show ip ospf database.
CCNP Certification / BCMSN Exam:
What two blocks of the Enterprise Composite Network Model work together to bring WAN connectivity and Internet access to users?
Answer: Enterprise Edge and Service Provider Edge.
CCNP Certification / ISCW Exam:
You want to display a message to users who connect to your router via Telnet. What command will you use to do so?
Answer: Use the banner login command.
CCNP Certification / ONT Exam:
By default, Cisco routers support three different algorithms for payload compression. What are they?
Answer: Stacker, Predictor, and M**ros*ft Point-to-Point Compression. ;)
Fresh-baked questions coming up later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments