Here are your Cisco CCNA, CCENT, and CCNP questions for Sunday, June 15. Be sure to check the other blog entries from Sunday for links to new CCENT and CCNA practice exam questions that have been posted over on the main site!



CCNA And CCENT Certification:

You have two Cisco routers directly connected at their Serial 0 interfaces. Identify the true statements regarding this connection.

A. The DCE must supply clockrate to the DTE.

B. The DTE must supply clockrate to the DCE.

C. No clockrate needs to be supplied by either side.

D. Both the DTE and DCE must supply clockrate to the other.

E. Since Cisco router Serial interfaces are DTE by default, such a connection literally cannot work.

F. Since Cisco router Serial interfaces are DCE by default, such a connection literally cannot work.


CCNP Certification / BSCI Exam:

Short answer: You are configuring an OSPF router to inject a default route into an OSPF domain. The command you've entered under the OSPF process is "default-information originate". What else do you have to do?


CCNP Certification / BCMSN Exam:

What interface-level command, configured on a switch port, will tell the IP Phone not to trust any CoS values sent from a PC connected to the phone?

A. switchport priority no cos trust

B. no mls qos

C. no mls qos trust cos

D. switchport priority extend cos 0

E. switchport priority extend cos 5


CCNP Certification / ISCW Exam:

Short answer: How many classes can be defined for PQ?


CCNP Certification / ONT Exam:

In the analog-to-digital conversion process, which of the following is optional?

A. Sampling

B. Quantizing

C. Encoding

D. Compression



Answers will be posted Monday, June 16!



To your success,



Chris Bryant

CCIE #12933

http://www.thebryantadvantage.com/