Here are the answers to the Cisco certification training questions posted here on Wednesday, May 7!
CCENT and CCNA Certification:
You're configuring a router to allow Telnet connections, configuring the login local command on the VTY lines. You want all users who successfully authenticate to be placed into enable mode without being prompted for an enable password. How will you accomplish this?
Answer: The login local command indicates that you're configuring individual username and passwords in a local database on the router. Just put the privilege 15 option in the middle of the username / password command, like this:
username chris privilege 15 password bryant
CCNP Certification / BSCI Exam:
Short answer:
What is the range of private AS numbers for BGP?
Answer: 64512 - 65535.
CCNP Certification / BCMSN Exam:
What's the basic purpose of VMPS?
A. dynamic VTP server assignments
B. enables the switch to dynamically locate TFTP servers
C. dynamic discovery of non-trunking switches
D. enabling use of dynamic VLANs
Answer: D. A VLAN Management Policy Server (VMPS) is used when dynamic VLAN assignment is in place.
CCNP Certification / ISCW Exam:
Which of the following is true regarding fast switching?
A. A route table lookup must be performed for each and every packet.
B. A route table lookup must be performed for only the first packet in a flow.
C. A route table lookup is performed for every 10th packet in the flow.
D. Fast switching does not utilize route table lookups.
Answer: B. Fast switching requires a routing table lookup only for the first packet in a flow.
CCNP Certification / ONT Exam:
Short answer: Name the three major sections of the Enterprise Composite Model.
Answer: Enterprise Campus, Enterprise Edge, and Service Provider Edge.
New questions posted later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCENT and CCNA Certification:
You're configuring a router to allow Telnet connections, configuring the login local command on the VTY lines. You want all users who successfully authenticate to be placed into enable mode without being prompted for an enable password. How will you accomplish this?
Answer: The login local command indicates that you're configuring individual username and passwords in a local database on the router. Just put the privilege 15 option in the middle of the username / password command, like this:
username chris privilege 15 password bryant
CCNP Certification / BSCI Exam:
Short answer:
What is the range of private AS numbers for BGP?
Answer: 64512 - 65535.
CCNP Certification / BCMSN Exam:
What's the basic purpose of VMPS?
A. dynamic VTP server assignments
B. enables the switch to dynamically locate TFTP servers
C. dynamic discovery of non-trunking switches
D. enabling use of dynamic VLANs
Answer: D. A VLAN Management Policy Server (VMPS) is used when dynamic VLAN assignment is in place.
CCNP Certification / ISCW Exam:
Which of the following is true regarding fast switching?
A. A route table lookup must be performed for each and every packet.
B. A route table lookup must be performed for only the first packet in a flow.
C. A route table lookup is performed for every 10th packet in the flow.
D. Fast switching does not utilize route table lookups.
Answer: B. Fast switching requires a routing table lookup only for the first packet in a flow.
CCNP Certification / ONT Exam:
Short answer: Name the three major sections of the Enterprise Composite Model.
Answer: Enterprise Campus, Enterprise Edge, and Service Provider Edge.
New questions posted later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments