Here are your free Cisco certification exam training questions for Tuesday, April 22!
CCENT Certification:
What command resulted in the following output?
R1#
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.12.123.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 68/68/72 ms
CCNA Certification:
In OSPF, what is meant by the term "external route"?
CCNP Certification / BSCI Exam:
By default, how many EIGRP hellos have to be missed for an adjacency to be declared down?
CCNP Certification / BCMSN Exam:
For what purpose is VMPS used?
CCNP Certification / ISCW Exam:
You've just completed a CBWFQ configuration - almost. You want to apply the policy map CCNP to traffic leaving interface serial0. What command on S0 will do this?
Answers will be posted on Wednesday, April 23!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCENT Certification:
What command resulted in the following output?
R1#
Type escape sequence to abort.
Sending 5, 100-byte ICMP Echos to 172.12.123.2, timeout is 2 seconds:
!!!!!
Success rate is 100 percent (5/5), round-trip min/avg/max = 68/68/72 ms
CCNA Certification:
In OSPF, what is meant by the term "external route"?
CCNP Certification / BSCI Exam:
By default, how many EIGRP hellos have to be missed for an adjacency to be declared down?
CCNP Certification / BCMSN Exam:
For what purpose is VMPS used?
CCNP Certification / ISCW Exam:
You've just completed a CBWFQ configuration - almost. You want to apply the policy map CCNP to traffic leaving interface serial0. What command on S0 will do this?
Answers will be posted on Wednesday, April 23!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments