Here are the answer to Monday, March 18's Cisco certification exam training questions!
CCENT Certification:
At which layer of the TCP/IP networking model does routing take place?
Answer: In the TCP/IP model, routing takes place at the Internet layer.
CCNA Certification:
Short answer: Describe briefly what is meant by the term "OSPF external route".
Answer: This is a route redistributed into an OSPF process.
CCNP Certification / BSCI Exam:
In what two OSPF network types are DRs and BDRs elected?
A. broadcast
B. non-broadcast
C. point-to-point
D. point-to-multipoint
Answer: A, B. Both broadcast and non-broadcast networks will elect a DR and BDR. Point-to-point and point-to-multipoint networks do not.
CCNP Certification / BCMSN Exam:
A switch port has just received a dynamic VLAN membership assignment. What other port feature will be enabled as a result?
A. Uplinkfast
B. Portfast
C. Backbonefast
D. dot1x port-based authentication
Answer: B. Portfast will be autoenabled in this situation.
CCNP Certification / ISCW Exam:
Short answer: What is the maximum number of characters that can make up a Cisco router password?
Answer: 25.
CCNP Certification / ONT Exam:
Short answer: What command will show you the size of the hardware queue for your router's Serial1 interface?
Answer: show controller serial 1.
More questions later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
CCENT Certification:
At which layer of the TCP/IP networking model does routing take place?
Answer: In the TCP/IP model, routing takes place at the Internet layer.
CCNA Certification:
Short answer: Describe briefly what is meant by the term "OSPF external route".
Answer: This is a route redistributed into an OSPF process.
CCNP Certification / BSCI Exam:
In what two OSPF network types are DRs and BDRs elected?
A. broadcast
B. non-broadcast
C. point-to-point
D. point-to-multipoint
Answer: A, B. Both broadcast and non-broadcast networks will elect a DR and BDR. Point-to-point and point-to-multipoint networks do not.
CCNP Certification / BCMSN Exam:
A switch port has just received a dynamic VLAN membership assignment. What other port feature will be enabled as a result?
A. Uplinkfast
B. Portfast
C. Backbonefast
D. dot1x port-based authentication
Answer: B. Portfast will be autoenabled in this situation.
CCNP Certification / ISCW Exam:
Short answer: What is the maximum number of characters that can make up a Cisco router password?
Answer: 25.
CCNP Certification / ONT Exam:
Short answer: What command will show you the size of the hardware queue for your router's Serial1 interface?
Answer: show controller serial 1.
More questions later today!
To your success,
Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/
Comments