Friday, May 23, 2008

The Countdown Is On - Only 4 Days Until My ISCW Study Package is released!

Release Date: This Tuesday, May 27

Even better - there's no need to wait until next week to start work on your CCNP - and you save $70 with my Ultimate CCNP Study Package Bundle!

To catch up on all of my exclusive ISCW tutorials - and to find out how you can be studying for CCNP exam success less than five minutes from now - just follow this link! Tutorial links are at the bottom of this page as well.

The CCNP ISCW Exam Study Package

Here's a new CCNP ISCW exam tutorial for you - an illustrated look at how to use Security Device Manager (SDM) to configure Easy VPN Server.

CCNP ISCW Certification Tutorial: Configuring Easy VPN Server With SDM

That's recommended reading for you CCENT and CCNA candidates as well. Neither SDM nor IPS will be on your exam, but this tutorial gives you an illustrated look at the Cisco Security Device Manager.

If you haven't seen SDM yet, you need to - and The Ultimate ISCW Study Package will have over 150 SDM screen shots!


Once you're done there, check out the answers to the Cisco certification exam questions posted here on Thursday, May 23!


CCNA Certification:

By default, what values are considered by IGRP and EIGRP when computing a path's metric?

A. bandwidth

B. cost

C. delay

D. load

E. MTU

Answers: A, C. Bandwith and delay are used by default; MTU and load can be used, but are not used by default. Cost is the term used for an OSPF route's metric.


CCNP Certification / BSCI Exam:

Which of the following is NOT one of the activities at the distribution layer of the Cisco Three-Layer Hierarchical Model?

A. traffic filtering

B. internet access

C. policy routing

D. inter-VLAN routing

E. end user interaction with the network

F. route redistribution

G. address aggregation & summarization

Answer: E. End users interact with the network at the Access layer of this model.


CCNP Certification / BCMSN Exam:

What term refers to the process of the switch placing data into the proper egress queue?

A. marking

B. scheduling

C. trusting

D. classification

Answer: B. The term "scheduling" refers to the process of the switch placing data into the proper exit ("egress") queue.


CCNP Certification / ISCW Exam:

Short answer: You're halfway through Setup mode when you realize that you would rather configure the router from the CLI. What keystroke will bring you to the CLI without saving any of the configuration you're created so far?

Answer: CTRL-C. A handy one to know even if you're not working on the CCNP!


CCNP Certification / ONT Exam:

Short answer: What queueing method presents a potential issue known as "packet starvation"? What does this term mean?

Answer: Priority queueing has four queues, named in accordance with the priority given to the packets in them - High, Medium, Normal, Low. PW does not use round-robin, so if too many packets are placed in the higher-priority queues, packets in the lower-priority queues stand a chance of never being serviced properly.

New questions posted later today, along with some special holiday weekend surprises over the next few days!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/

No comments:

Blog Archive