Wednesday, January 15, 2014

It's January 15, and here's your CCNP ROUTE and TSHOOT Training Post for today!

Test your knowledge with these free Flash Card practice exam questions, and I'll see you Thursday with more!

(The second my voice recovers from this nasty cold everyone on the East Coast has, I'll shoot new videos for this exam!)

When you're done here, grab a copy of my CCNP ROUTE Study Guide on Amazon!  It's the best ten bucks you'll ever spend on your ROUTE and TSHOOT studies!

Today's ROUTE and TSHOOT Flash Card questions all deal with this configuration:

R4(config)#router ospf 1
R4(config-router)#network area 0
R4(config-router)#network area 1
< router reloaded at this point >
R4(config)#interface loopback0
R4(config-if)#ip address

1.  Which of those numeric values matters only to the local router?

2.  What will the OSPF RID be?

3.  Is this router an ABR, an ASBR, both, or neither?  How can you tell?

Answers right after this brief, important message -- especially for those of you who want your CCNP in 2014!

Over 47,000 happy Bulldogs just like you are in my CCNP Video Boot Camps!

Grab a 60% discount with these links, and let's get started on your CCNP exam success RIGHT NOW!

CCNP All-In-One Boot Camp ($99 for 50+ hours!)

Let's check out the answers!

1.  The "1" in router ospf 1 is the OSPF process ID, and is locally significant only.

2.  The router-id command is used to hardcode that value, and since a reload was performed to make that change take effect, the RID is now

3.  The network commands indicate links in different areas, so this is an Area Border Router (ABR).   We don't see any route redistribution taking place, so this is not an Autonomous System Border Router (ASBR).

See you Thursday with much more!  

Chris B.

My CCNP ROUTE Study Guide is an insurance policy for your exam success.

Don't walk into the exam room uninsured.   Grab your copy today!

Chris Bryant on Twitter

Chris Bryant on Udemy

Chris Bryant on Facebook

Chris Bryant on YouTube  (Over 11,000 subscribers!)

Chris Bryant on LinkedIn

No comments:

Blog Archive