Tuesday, January 13, 2009

Hey, I owe you some answers - the answers to this past Friday's Cisco practice exam questions, that is! :) Here they are!


CCNA And CCENT Certification:

Identify the destination address of each of the following. (Addresses have been listed to the right of each.)

A. broadcast frame - ff-ff-ff-ff-ff-ff

B. RIPv1 routing update packet - 255.255.255.255

C. broadcast packet - 255.255.255.255

D. RIPv2 routing update packet -- 224.0.0.9

E. EIGRP Hello packet -- 224.0.0.10



CCNP Certification / BSCI Exam:

Describe a situation in which you may need the BGP command ebgp-multihop.

Answer: If you choose to use loopback addresses in your neighbor statements on two routers, they are not considered directly connected even if they share a common subnet.

The ebgp-multihop command is necessary to configure eBGP peering relationships where the addresses used to form the adjacency are not on the same segment.



CCNP Certification / BCMSN Exam:

The CiscoWorks WLSE acts as the manager of the autonomous APs. If there's a need to change the config on the APs, we've got two choices. What are they?

Answer: The CiscoWorks WLSE acts as the manager of the autonomous APs. If there's a need to change the config on the APs, we've got two choices:

Perform them on each individual AP

Perform the change on the WLSE


CCNP Certification / ISCW Exam & CCNA Security:

The Authentication Proxy can store user profiles on which of the following?

A. RADIUS Server

B. TACACS+ Server

C. Both of these

D. Neither of these

Answer: C. You can store those profiles on either of those two server types.


See you later today with another set of Cisco practice exam questions!

To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/

No comments:

Blog Archive