Wednesday, September 10, 2008

It's Wednesday, September 10, and here are the answers to Tuesday's Cisco practice exam questions!

CCNA Certification And CCENT Certification:

What loop prevention service or protocol is in effect in the following command output? What command produced the output?

R3# ?
RIP: sending v2 update to via Serial0 ( ->, metric 1, tag 0 ->, metric 2, tag 0 ->, metric 3, tag 0 ->, metric 16, tag 0

Answer: The command is debug ip rip, and the last route shows route poisoning in effect.

CCNA Security Certification / CCNP ISCW Exam:

Which of the following are enabled in SDM's IPS wizard by default?

A. Enable Syslog Notification

B. Engine Fail Closed

C. Enable Deny Action On IPS Interface

D. Use Built-In Signature (As Backup)

Answers: A, C.

CCNA Wireless:

Name the four WMM preset priority levels and the traffic type handled by each level.


Platinum (for voice)
Gold (for video)
Silver (for everything else - best-effort)
Bronze (background traffic)

CCNA Voice:

Of MGCP, SIP, and H.323, which are IETF standard signaling protocols?

Answers: MGCP and SIP. H.323 is an ITU standard.

CCNP Certification / BSCI Exam:

What version of PIM can be described as a strict "flood-and-prune" operation?

A. Sparse

B. Flood

C. Dense

D. Sparse-Dense

Answer: C.

CCNP Certification / BCMSN Exam:

The following commands are changing how many default values?

SW1(config)#spanning vlan 1 hello 2
SW1(config)#spanning vlan 1 forward-time 10
SW1(config)#spanning vlan 1 max-age 15

Answer: Two - the default forward-time is 15 seconds, and the default max-age value is 20 seconds. The Hello interval is two seconds by default.

CCNP / ONT Exam:

Which of the following can NBAR not analyze?

A. non-IP traffic

B. packet fragments

C. MPLS packets

D. packets created or destined for the local router

Answer: A, B, C, D.

More questions later today, along with three new practice exams! See you later today!

To your success,

Chris Bryant
CCIE #12933

No comments:

Blog Archive