Monday, September 29, 2008

Here are your Cisco practice exam questions for Monday, September 29!


CCNA Certification And CCENT Certification:

Short answer: What command resulted in the following output?

R3# ?
HD unit 1, idb = 0x1C44E8, driver structure at 0x1CBAC8
buffer size 1524 HD unit 1, V.35 DCE cable



CCNA Security Certification / CCNP ISCW Exam:

Short answer: "All" is one of the SDEE Message display options available in SDM. Name the other three.


CCNP Certification / BSCI Exam:

Is the following configuration legal? If so, what's the meaning of the third line?

R2(config)#route-map PASSBSCI permit 20
R2(config-route-map)#match ip address 23
R2(config-route-map)#set interface serial0 ethernet0



CCNP Certification / BCMSN Exam:

Port security can't be used with which of the following?

A. trunk ports

B. Etherchannel ports

C. destination SPAN port

D. 802.1x ports



CCNP / ONT Exam:

Give both the numeric and non-numeric name and value for the highest level of IP Precedence available in the following configuration.

R2(config-pmap-c)#set precedence ?

Answers right here on Tuesday, September 30!


Be sure to read today's other blog posts for links to the first four videos on my new YouTube channel - I'll add a new CCNA Security video for you later today, too!
To your success,

Chris Bryant
CCIE #12933
http://www.thebryantadvantage.com/

No comments:

Blog Archive