Tuesday, September 09, 2008

Here are your CCNA, CCENT, and CCNP questions for Tuesday, September 9!

CCNA Certification And CCENT Certification:

What loop prevention service or protocol is in effect in the following command output? What command produced the output?

R3# ?
RIP: sending v2 update to via Serial0 ( ->, metric 1, tag 0 ->, metric 2, tag 0 ->, metric 3, tag 0 ->, metric 16, tag 0

CCNA Security Certification / CCNP ISCW Exam:

Which of the following are enabled in SDM's IPS wizard by default?

A. Enable Syslog Notification

B. Engine Fail Closed

C. Enable Deny Action On IPS Interface

D. Use Built-In Signature (As Backup)

CCNA Wireless:

Name the four WMM preset priority levels and the traffic type handled by each level.

CCNA Voice:

Of MGCP, SIP, and H.323, which are IETF standard signaling protocols?

CCNP Certification / BSCI Exam:

What version of PIM can be described as a strict "flood-and-prune" operation?

A. Sparse

B. Flood

C. Dense

D. Sparse-Dense

CCNP Certification / BCMSN Exam:

The following commands are changing how many default values?

SW1(config)#spanning vlan 1 hello 2
SW1(config)#spanning vlan 1 forward-time 10
SW1(config)#spanning vlan 1 max-age 15

CCNP / ONT Exam:

Which of the following can NBAR not analyze?

A. non-IP traffic

B. packet fragments

C. MPLS packets

D. packets created or destined for the local router

I'll have the answers right here on Wednesday, September 10!

To your success,

Chris Bryant
CCIE #12933

No comments:

Blog Archive